Argon Mini FAN for Raspberry Pi 4
New
Indicative market price: R146.74
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
3388
Bob Shop ID
613701149
The Argon Mini Fan is the latest Raspberry Pi Fan with Heatsink that easily fits into any case.
This Rpi Fan is also fully controllable with its switch.
You can turn it on and off or program it to turn on at a certain temperature when set to PWM Mode.
Has a built-in heatsink that connects to the CPU to make it a useful 30mm cooling fan
5 volt fan uses only 12 GPIO pins on any Raspberry Pi 4 and fits inside the POLY+ Vented case and Official Raspberry Pi 4 Case
Features
- Works with Raspberry Pi 4 and Raspberry Pi 3 Model B boards
- The Argon Mini Fan is PWM Controllable. It can be turned on at any assigned Temperature using Raspbian OS.
- The switch can turn the Mini Fan on or off, and even set the Mini Fan to PWM mode for full customizability.
- A heatsink is also added to ensure contact with the CPU of your Raspberry Pi.
- Includes two fans that easily fit inside official Raspberry Pi Cases and Argon POLY+ Cases, and can be used for different projects.
What's in the box?
1 x Mini Fan cooler
Resources
- User Guide
Fan Switch Settings
- ON - Mini FAN will always turn ON when the Raspberry Pi is powered
- OFF - Turns OFF the Mini FAN
- PWM - Sets the Mini FAN into a Pulse Width controllable mode
Setting the PWM Threshold
The instructions below will start the Mini Fan at CPU Temp 55 degrees (tempt 55000). You may set your desired fan initiation temperature as per your requirements:
1. In Raspberry Pi OS, open a new terminal window
2. Enter sudo nano /boot/config.txt
3. Add the following line: dtoverlay=gpio-fan,gpiopin=18,temp=55000
4. Save changes and exit by pressing Ctrl+X