Gigabyte Z590 Aorus Master Wireless Motherboard

FEATURES

Gigabyte Z590 Aorus Master Wireless Motherboard

CPU

• LGA1200 package
• 11th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors
• 10th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors / Intel Core i3 processors/ Intel Pentium processors / Intel Celeron processors*
• Limited to processors with 4 MB Intel Smart Cache, Intel Celeron G5xx5 family.
• L3 cache varies with CPU

Chipset

• Intel Z590 Express Chipset

Memory

• 11th Generation Intel Core i9/i7/i5 processors:
  • Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules
• 10th Generation Intel Core i9/i7 processors:
  • Support for DDR4 2933/2666/2400/2133 MHz memory modules
• 10th Generation Intel Core i5/i3/Pentium/Celeron processors:
  • Support for DDR4 2666/2400/2133 MHz memory modules
• 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
• Dual channel memory architecture
• Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
• Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
• Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

• Integrated Graphics Processor-Intel HD Graphics support:
• 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
  • Support for DisplayPort 1.2 version and HDCP 2.3
• Graphics specifications may vary depending on CPU support.

Audio

• Realtek ALC1220-VB codec
• The front panel line out jack supports DSD audio.
• ESS ES9118 DAC chip
• Support for DTS:X Ultra
• High Definition Audio
• 2/4/5.1/7.1-channel
• Support for S/PDIF Out

LAN

• Aquantia 10GbE LAN chip (10 Gbit/5 Gbit/2.5 Gbit/1 Gbit/100 Mbit)
• Wireless Communication module
• Intel Wi-Fi 6E AX210
• WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
• BLUETOOTH 5.2
• Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
• Actual data rate may vary depending on environment and equipment.

Expansion Slots

• 1 x PCI Express x16 slot, running at x16 (PCIEX16)
  • For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
• 1 x PCI Express x16 slot, running at x8 (PCIEX8)
  • The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode.
• The PCIEX16 and PCIEX8 slots conform to PCI Express 4.0 standard.
  • Supported by 11th Generation processors only.
• 1 x PCI Express x16 slot, running at x4 (PCIEX4)
• The PCIEX4 slot conforms to PCI Express 3.0 standard.

Multi-Graphics Technology

• Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies

Storage Interface

• CPU:
  • 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)*
  • * Supported by 11th Generation processors only.
• Chipset:
  • 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2P_SB)
  • 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2M_SB)
• 6 x SATA 6Gb/s connectors
• Support for RAID 0, RAID 1, RAID 5, and RAID 10
• Refer to "1-9 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
• Intel Optane Memory Ready

USB

• Chipset:
• 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2 support
• 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header
• 5 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
• Chipset+2 USB 3.2 Gen 1 Hubs:
• 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
• Chipset+USB 2.0 Hub:
• 4 x USB 2.0/1.1 ports available through the internal USB headers
• Internal I/O Connectors
• 1 x 24-pin ATX main power connector
• 2 x 8-pin ATX 12V power connectors
• 1 x CPU fan header
• 1 x water cooling CPU fan header
• 4 x system fan headers
• 4 x system fan/water cooling pump headers
• 2 x addressable LED strip headers
• 2 x RGB LED strip headers
• 3 x M.2 Socket 3 connectors
• 6 x SATA 6Gb/s connectors
• 1 x front panel header
• 1 x front panel audio header
• 1 x USB Type-C® header, with USB 3.2 Gen 2 support
• 2 x USB 3.2 Gen 1 headers
• 2 x USB 2.0/1.1 headers
• 1 x noise detection header
• 2 x Thunderbolt add-in card connectors
• 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
• 1 x power button
• 1 x reset button
• 2 x temperature sensor headers
• 1 x Clear CMOS jumper
• 2 x BIOS switches
• Voltage Measurement Points

Back Panel Connectors

• 1 x Q-Flash Plus button
• 1 x Clear CMOS button
• 2 x SMA antenna connectors (2T2R)
• 1 x DisplayPort
• 1 x USB Type-C® port, with USB 3.2 Gen 2x2 support
• 5 x USB 3.2 Gen 2 Type-A ports (red)
• 4 x USB 3.2 Gen 1 ports
• 1 x RJ-45 port
• 1 x optical S/PDIF Out connector
• 5 x audio jacks

BIOS

• 2 x 256 Mbit flash
• Support for DualBIOS

Operating System

• Support for Windows 10 64-bit

Form Factor

• ATX Form Factor; 30.5cm x 24.4cm

PRODUCT SPECIFICATIONS