D-Link DSL-2500U ADSL2+ Router
The DSL-2500U is an affordable high-performance ADSL/Ethernet router for home and small office networks.
It allows to get broadband Internet access through ADSL quickly and easily and arrange link sharing among multiple users.
DSL-2500U provides all the essentials for a safe, high-speed wireless network: ADSL/ADSL2/ADSL2+ standards, Fast Ethernet standard, built-in firewall, QoS engine, and numerous additional feature. The device is equipped with Ethernet port to which you can connect a single computer or a switch.
The router is equipped with a firewall. Advanced security features minimize threats from hackers and prevent intrusions to your network and block access to unwanted websites for users of your local network.
You can configure and manage the DSL-2500U via the user-friendly web-based interface
Interfaces
ADSL: 1 RJ-11 port
LAN: 1 RJ-45 10/100Base-TX port with auto MDI/MDIX
ADSL standards
ADSL: full rate ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2 (G.lite) Annex A, ITU-T G.994.1 (G.hs)
ADSL2: ITU-T G.992.3 (G.dmt.bis) Annex A/L/M, ITU-T G.992.4 (G.lite.bis) Annex A
ADSL2+: ITU-T G.992.5 Annex A/L/M
WAN connection types
PPPoA
PPPoE
IPoE
IPoA
Bridge
ATM/PPP protocols
Bridged and routed Ethernet encapsulation
VC/LLC-based multiplexing
ATM Forum UNI3.1/4.0 PVC (up to 8 PVC)
ATM Adaptation Layer Type 5 (AAL5)
ITU-T I.610 OAM F4/F5 loopback
ATM QoS
PPP over ATM (RFC 2364)
PPP over Ethernet (PPPoE)
Keep-alive for PPP connections
Network protocols and functions
Static IP routing
NAT
DHCP server/client/relay
DNS relay
Dynamic DNS (DDNS)
UPnP
VLAN support
IGMP proxy
Firewall and access control
NAT firewall
Stateful Packet Inspection (SPI)
URL filter
Packet filtering (IP/ICMP/TCP/UDP)
Virtual servers
Prevention of DoS attacks
Intrusion detection and event logging
DMZ
Port Triggering
QoS
3 priority queues
Configuration and management
Bilingual (Russian and English) web-based interface for configuration and management
Access via TELNET
Firmware update via web-based interface
Saving/restoring configuration to/from file
Support of remote logging
Automatic synchronization of system time with NTP server
Power supply
External power adapter 5VDC/1A
Buttons
ON/OFF button
RESET button to restore factory default settings
Included:
- RJ45 Cable
- RJ11 Cable
- DSL/Telephone Splitter
- External power adapter
- Software
Condition like new