Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Deep cycle Gel battery
12 Volt 200 amp/hours
Deep discharge Technology
Ideal for Solar systems, Inverters, UPS, Electric power vehicles,
Golf carts & Buggies, Electric Wheelchairs,
Power tools, Cleaning equipment, and more...
Specifications:
Charging voltage - Float charge- 13.6V~13.7V
Cycle Charge: 14.6V~15.0V
Max Charging Current: 20A~50A
When the ambient temperature is below 15 degrees Celsius or above 35 degrees Celsius
the recommended compensation factor is -3mV/C/cell
Battery temperature is charging should be in the range of -15C~50C
Dimensions:
565(L) x 120(W) x 330(H)
Weight: 34 KG
We recommend that these batteries be used together on a 48V system or individually on a 24V/12V system. Do not mix with another brand.
What is in the package:
4 x Deep Cycle 12V 200AH Gel Slimline Battery - GEB
Best Practices to Prolong Battery Life:
- Never discharge your battery below the recommend Depth of Discharge (DOD). 50% for GEL and 80% for Lithium Ion.
- Ensure your battery and the terminals to the Inverter are clean and tightly fastened.
- Consistently drawing current from a battery without letting it fully charge degrades the battery quicker.
- Use batteries at an ambient temperature of 25 degrees Celsius.
- Ensure good ventilation.
GEL batteries are not recommended for use in stage 3-6 load shedding for a prolonged period because the batteries would not get enough time to recharge full. Each loadshedding session is counted as a cycle as the battery is drained when the power is off and starts charging again when the power comes back on.
Please make sure that your inverter/charger works well with GEL batteries before buying. Warranty falls off if wrong or incompatible inverter/charger is used.
Warranty: 30 Days Replacement
Warranty Condition:
A certified electrical wireman or master electrician with a current Department of Labor registration is required to install all inverters and batteries. Once installed, a current electrical certificate of compliance (COC) for the installation of the solar or backup system is required. The installation needs to adhere to SANS 10142 in its entirety. If a warranty claim is filed without installation images, a current COC, and documentation that the item was installed by a licensed wireman or master electrician, it may be denied and become void.