AC 110V 1/2 Inch 2-way Drain Valve Electronic Timed Air Compressor Condensate Auto Pressure Switch
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615090638
Description: Electronic Timed Air Compressor Condensate Auto AC 110V 1/2 Inch 2-way Drain Valve ? Specification: Voltage: AC110V 50Hz Voltage Range: 10% Time Interval ( OFF ): 0.5--45 minutes (adjustable) Discharge Time ( ON ): 0.5--10 seconds (adjustable) Manual Test Button: Yes( micro switch) The Current Consumption: Max 4mA Ambient Temperature: -40 C to 60 C. Protection Grade: IP65
? Shell Material: Flame retardant ABS plastic Electrical Connection: DIN43650A Indicator Lamp: LED indicating power ON / OFF Type: two-way direct-acting valve Flow Aperture: 5 mm Insulation Class: H In / Out Port Size: 1/2 Maximum Working Pressure: 1.6Mpa Maximum Temperature: 90 C Valve Material: Forging brass Notes: the plug is built-in, you can unscrew the screw. ? Installation: 1. Clean the compressed air system before installing 2. Attention to the direction of the arrow when the valve body; outlet do not use the impact of the hose does not impact 3. The supply voltage must be the same as the drain valve voltage; when using DC, the positive pole must be connected to?the connector 1 4. The factory has been connected to the cable drain valve, fade for the fire line L, blue for the zero line N, yellow and?green color for the safe ground GND 5. Always tighten the long screws on the terminal box to prevent the water from burning ? Warning: When installing an electronic drain valve, make sure that: 1. Compressed air has been emptied (at zero pressure) 2. Power has been cut off ? Timer setting: Left knob to set the discharge time, the right knob to set the interval time;
the first discharge time of 2s, the interval?time is 20min, and then need to be further adjusted ? Package Included: 1x Drain Valve ? More Details:
? Shell Material: Flame retardant ABS plastic Electrical Connection: DIN43650A Indicator Lamp: LED indicating power ON / OFF Type: two-way direct-acting valve Flow Aperture: 5 mm Insulation Class: H In / Out Port Size: 1/2 Maximum Working Pressure: 1.6Mpa Maximum Temperature: 90 C Valve Material: Forging brass Notes: the plug is built-in, you can unscrew the screw. ? Installation: 1. Clean the compressed air system before installing 2. Attention to the direction of the arrow when the valve body; outlet do not use the impact of the hose does not impact 3. The supply voltage must be the same as the drain valve voltage; when using DC, the positive pole must be connected to?the connector 1 4. The factory has been connected to the cable drain valve, fade for the fire line L, blue for the zero line N, yellow and?green color for the safe ground GND 5. Always tighten the long screws on the terminal box to prevent the water from burning ? Warning: When installing an electronic drain valve, make sure that: 1. Compressed air has been emptied (at zero pressure) 2. Power has been cut off ? Timer setting: Left knob to set the discharge time, the right knob to set the interval time;
the first discharge time of 2s, the interval?time is 20min, and then need to be further adjusted ? Package Included: 1x Drain Valve ? More Details: