DC 12V 3.5mA Microphone Pickup Audio Microphone Amplifier Module DIY Kit Dual Track Output Gain Adju
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615113528
Description:
Product name: Microphone with adjustable sensitivity
Working voltage: DC9-15V, 12V recommended
Working current: above 100mA
Response frequency: 20Hz-20KHz
Monitoring range: about 100 square meters
Finished product size: length 56 * width 25 * height 16mm
Product net weight: 15 grams
The power input has anti-reverse protection, which can effectively prevent the module from being damaged if the power is reversed.
Product description:
This product uses a low-noise processing chip, plus a diaphragm capacitor microphone, combined into a power amplifier that can be connected to audio input.
Can directly monitor the subtle sound of the scene. Equipped with a trimming resistor, which can adjust the sensitivity and easily change the monitoring distance and range.
Scope of application:
It can be used in factories, banks, schools, trains and other production facilities that need to be monitored. It can be used as auxiliary equipment such as monitoring and synchronous recording. It can also be used as a megaphone with the power amplifier. Connecting two modules can be used as an intercom system.
Tips:
When the signal is too strong, or the pickup and the speaker are close together, self-excitation may occur. At this time, you can set the amplifier volume.
Turn down or reduce the sensitivity on the module.
The positive and negative sides of the interface are marked, pay attention to it when wiring.
The output needs to be connected to the amplifier to hear the sound, and cannot be directly connected to the speaker. Do not need to connect the amplifier when recording.
Package included:
1 x Microphone Pickup Audio Microphone Amplifier Module DIY
Product name: Microphone with adjustable sensitivity
Working voltage: DC9-15V, 12V recommended
Working current: above 100mA
Response frequency: 20Hz-20KHz
Monitoring range: about 100 square meters
Finished product size: length 56 * width 25 * height 16mm
Product net weight: 15 grams
The power input has anti-reverse protection, which can effectively prevent the module from being damaged if the power is reversed.
Product description:
This product uses a low-noise processing chip, plus a diaphragm capacitor microphone, combined into a power amplifier that can be connected to audio input.
Can directly monitor the subtle sound of the scene. Equipped with a trimming resistor, which can adjust the sensitivity and easily change the monitoring distance and range.
Scope of application:
It can be used in factories, banks, schools, trains and other production facilities that need to be monitored. It can be used as auxiliary equipment such as monitoring and synchronous recording. It can also be used as a megaphone with the power amplifier. Connecting two modules can be used as an intercom system.
Tips:
When the signal is too strong, or the pickup and the speaker are close together, self-excitation may occur. At this time, you can set the amplifier volume.
Turn down or reduce the sensitivity on the module.
The positive and negative sides of the interface are marked, pay attention to it when wiring.
The output needs to be connected to the amplifier to hear the sound, and cannot be directly connected to the speaker. Do not need to connect the amplifier when recording.
Package included:
1 x Microphone Pickup Audio Microphone Amplifier Module DIY