Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
2 x 12V 200AH Deep Cycle Gel Battery - Digimark (2PCS - 24V)
Digimark Germany Technology
Deep Cycle Solar Gel Battery.
This battery is 12 Volt and has a 200 amp/hours capacity.
This Deep cycle battery can be used with the following:
- Inverters
- UPS systems
- Electrical Tools
- Boats or Caravans
- Electrical Vehicle
- Gate/Garage Motors
- alarm systems
- Electric fence energizers
Specifications
- 12 Volt DC
- 200 Amp Hours
- Terminal Type: small
- Net Weight: 40Kg
- Dimensions: 53cm X 25cm X 28 cm
We recommend that these batteries be used together on a 24V system or individually on a 12V system. Do not mix with another brand.
What's in the package
2 x Deep Cycle Gel Battery 200AH
Best Practices to Prolong Battery Life:
- Never discharge your battery below the recommded Depth of Discharge (DOD). 50% for GEL and 80% for Lithium Ion.
- Ensure your battery and the terminals to the Inverter are clean and tightly fafstened.
- Consistently drawing current from a battery without letting it fully charge degrades the battery quicker.
- Use batteries at an ambient temperature of 25 degress Celcius.
- Ensure good ventilation.
GEL batteries are not recommended for use in stage 3-6 load shedding for a prolonged period because the batteries would not get enough time to recharge full. Each loadshedding session is conted as a cycle as the battery is drained when the power is off and starts charging again when the power comes back on.
Please make sure that your inverter/charger works well with GEL batteries before buying. Warranty falls off if wrong or incompatible inverter/charger is used.
Warranty Condition:
A certified electrical wireman or master electrician with a current Department of Labor registration is required to install all inverters and batteries. Once installed, a current electrical certificate of compliance (COC) for the installation of the solar or backup system is required. The installation needs to adhere to SANS 10142 in its entirety. If a warranty claim is filed without installation images, a current COC, and documentation that the item was installed by a licensed wireman or master electrician, it may be denied and become void.