Alva Bullnose Regulator And Hose
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Product details
Condition
New
Location
South Africa
Product code
G025
Bob Shop ID
614622108
Alva Bullnose Regulator And Hose- For Use With 9Kg and Above LP Gas Cylinders, Low Pressure Regulator And 8mm Hose with Two Clamps, Left Hand Thread, Hose Length 1.2 Metres, Blister Pack, 6 Months Warranty
Product Overview
The Alva Bullnose Regulator And 8mm Hose is designed to work with 9 kg and above LP Gas cylinders for both domestic and industrial settings. The purpose of the regulator is to control the flow of gas and lower the pressure from the tank to the appliance in the gas environment system and also acts as a safety barrier between the high pressure of the tank and the end use appliance with a flow capacity of 1kg per hour . This Bullnose regulator fits an 8mm hose which is included. For LP Gas use only.
Highlights
• Alva Bullnose Regulator And 8mm Hose
• For Use With 9Kg and Above LP Gas Cylinders
• Left Hand Thread
• Low Pressure Regulator And 8mm Hose with Two Clamps
• Hose Length 1.2 Metres
• Alva Bullnose Regulator And 8mm Hose
• For Use With 9Kg and Above LP Gas Cylinders
• Left Hand Thread
• Low Pressure Regulator And 8mm Hose with Two Clamps
• Hose Length 1.2 Metres
Specifications
• Stock Code G025
• Description Alva Bullnose Regulator And 8mm Hose
• Product Type Single Stage Regulator For Use With 9Kg and Above LP Gas Cylinders
• Cylinder Size (Recommended): 9kg - 48kg 5/8" BSP
• Operating Pressure: 700kPa at 2.8kPa output
• Capacity: 1.0kg/h
• Dimensions: 265mm(l) x 65mm(w) x 320mm(h)
• Weight: 0.252kg
• Approved in accordance with:, SANS 1237, SANS 1156 (regulator & hose)
What's In The Box
• 1 x Bullnose regulator
• 1 x Hose 1.2m
• 2 x Clamps
• 1 x Bullnose regulator
• 1 x Hose 1.2m
• 2 x Clamps