This item has closed with no items sold
View other items offered by PC Spot345
POLISHING SPONGE HOOK AND LOOP 125MM 5'
New
R154.00
Closed
17 May 24 14:27
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
VS-SPC00124
Bob Shop ID
609007767
Compounding sponge
Pattern: Standard
Density: Firm
Colour: Blue
Diameter: 125mm
Thread/hook and loop: hook and loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR | POLISH | COMPOUND |
| White | Good | Best |
| Orange | Good | Best |
| Red | Best | |
| Black | Best |
Compounding sponge range:
| ORDER NO. | DENSITY | COLOUR | DIAMETER | THREAD | PATTERN |
| SPC00101 | Firm | Orange | 200mm | hook and loop | Standard |
| SPC00100 | Soft | Yellow | 200mm | hook and loop | Standard |
| SPC00102 | Soft | Red | 200mm | hook and loop | Standard |
| TCCS15058 | Firm | White | 150mm | 5/8 UNC | Standard |
| TCCS15014-1 | Firm | White | 150mm | M14 | Standard |
| TCCS15014-4 | Firm | White | 150mm | M14 | Standard |
| TCCS15014 | Firm | Orange | 150mm | M14 | Standard |
| TCC15014-2 | Soft | Red | 150mm | M14 | Standard |
| TCCS15014-3 | Soft | Black | 150mm | M14 | Standard |
| TCCS15014-5 | Soft | Black | 150mm | M14 | Waffle |
| SPC00124 | Firm | Blue | 125mm | hook and loop | Standard |
NOTE:
For the 200mm hook and loop compounding sponges, use the M14 backing padSPC00106.
Adaptors to convert or lenghten the polisher's thread:
| ORDER NO./td> | MALE THREAD | FEMALE THREAD |
| SPC00055 | 5/8 UNC | 5/8 UNC |
| SPC00053 | 5/8 UNC | M14 |
| SPC00054 | M14 | 5/8 UNC |
| SPC00052 | M14 | M14 |
Recommended polishing compounds to use:
- Liquid Shine High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step