PULUZ 10.2 inch 26cm Curved Surface 168 LED Marquee LED RGBWW Dual-color Temperature Dimmable Rin...
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
PU504B
Bob Shop ID
611364289
Features
1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included).
2. The ring light is made of 168pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography.
4. RGB colors lighting mode adjustable brightness for your choose, you can adjust the color and brightness very easily, excellent brightness can be achieved without installing extra colorful filters. Different colors of soft natural light illuminate your beauty in different occasions.
5. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.
6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc.
7. The phone clamp suitable for the cellphone width of 6-8.5cm.
Specifications
1. LED Beads: 48pcs SMD 5050 RGB + 2 x 60pcs SMD 2835
2. Input voltage: DC5V+/-0.2V (power output current is strongly recommended 3A)
3. Lamp brightness: 24-26lm
4. Input interface: USB
5. Modes: 8-level static brightness adjustment 8-level dynamic speed adjustment, 13 kinds of static 13 kinds of dynamic switching (manual), 26 kinds of mode cycle switching
6. Working current: Mixed color light 5V 2A, RGBW 5V 1.3A, blue light/red light/ green light are 5V 0.7A each, warm monochromatic light 5V 1.6A, white light 5V 1.8A
7. Remote control frequency: RF 433M (can pass through the wall)
8. Remote control distance: Less than 12 meters
9. Wire parameters: Total length 2 meters, input No. 22 two-core wire (can load 3A current), output No. 26 six-core wire (can load 3A total current)
10. White light color temperature: 6500K
11. Warm white color temperature: 3200K
12. Light color:
- Red: Wavelength 620-625nm, luminous flux 600mcd/Lm
- Green: Wavelength 520-525nm, luminous flux 1000mcd/Lm
- Blue: Wavelength 460-465nm, luminous flux 400mcd/Lm
Package List
1. Ring LED Light x 1
2. Tripod Ball Head x 1
3. USB Cable Wire Control x 1
4. Remote Control x 1
5. Phone Clamp x 1
6. Color Package Box x 1
1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included).
2. The ring light is made of 168pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography.
4. RGB colors lighting mode adjustable brightness for your choose, you can adjust the color and brightness very easily, excellent brightness can be achieved without installing extra colorful filters. Different colors of soft natural light illuminate your beauty in different occasions.
5. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.
6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc.
7. The phone clamp suitable for the cellphone width of 6-8.5cm.
Specifications
1. LED Beads: 48pcs SMD 5050 RGB + 2 x 60pcs SMD 2835
2. Input voltage: DC5V+/-0.2V (power output current is strongly recommended 3A)
3. Lamp brightness: 24-26lm
4. Input interface: USB
5. Modes: 8-level static brightness adjustment 8-level dynamic speed adjustment, 13 kinds of static 13 kinds of dynamic switching (manual), 26 kinds of mode cycle switching
6. Working current: Mixed color light 5V 2A, RGBW 5V 1.3A, blue light/red light/ green light are 5V 0.7A each, warm monochromatic light 5V 1.6A, white light 5V 1.8A
7. Remote control frequency: RF 433M (can pass through the wall)
8. Remote control distance: Less than 12 meters
9. Wire parameters: Total length 2 meters, input No. 22 two-core wire (can load 3A current), output No. 26 six-core wire (can load 3A total current)
10. White light color temperature: 6500K
11. Warm white color temperature: 3200K
12. Light color:
- Red: Wavelength 620-625nm, luminous flux 600mcd/Lm
- Green: Wavelength 520-525nm, luminous flux 1000mcd/Lm
- Blue: Wavelength 460-465nm, luminous flux 400mcd/Lm
Package List
1. Ring LED Light x 1
2. Tripod Ball Head x 1
3. USB Cable Wire Control x 1
4. Remote Control x 1
5. Phone Clamp x 1
6. Color Package Box x 1