RC UBEC 7A BEC Full Shielding Antijamming Switching Regulator External Reciever Power Module
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615163572
RC UBEC 7A BEC Full Shielding Antijamming Switching Regulator External Reciever Power Module?
Features 1 Adopting switching power supply structure design, the switching power supply main control chip frequency is 300KHz, and it has over-current and over-temperature protection functions, and the chip efficiency is as high as 92%; 2 Body is small and light; 3 The electronic device is protected by the shielding cover, and the output line is equipped with a magnetic ring, which greatly reduces electromagnetic interference and ensures the normal operation of the receiver 4 It has a protection function to prevent the polarity of the power supply from being reversed. If the power supply is accidentally reversed, it will not cause damage to UBEC
Advantages compared with traditional BEC: Compared with BEC with linear voltage regulator, the advantages of BEC with switching power supply mode are mainly reflected in: when using more than 3 strings (11.1V) batteries, it can greatly reduce BEC heating and improve overall efficiency. For example: when using 4 strings of lithium batteries, the voltage is about 14.8V in normal use.
a??Using the transmission linear voltage stabilization method, to output a current of 5V/1A, the power supply terminal must also input a current of 1A. So there will be 14.8V??1A= 14.8W power consumption on BEC, but the actual useful output of BEC is only 5V??1A=5W, so the overall efficiency is only 5/14.8= 33.8%, and the power consumption of 9.8W is converted into Heat, so it will cause the BEC to overheat, the chip enters the protection state and cannot work; a??Using switching power supply mode, to output 5V/1A current, our actual test shows that the power supply terminal only needs to input 0.38A current, that is, 14.8V??0.38A= 5.6W power
Specification UBEC-7A? Operating voltage: 5.5v-35v lipo 2s-8s Continuous Current: 6A Instantaneous current: MIN 7.5A 20 sec Output voltage: 5.25V +/- 0.5V Weight: 18g
Package Included 1 x UBEC?
Features 1 Adopting switching power supply structure design, the switching power supply main control chip frequency is 300KHz, and it has over-current and over-temperature protection functions, and the chip efficiency is as high as 92%; 2 Body is small and light; 3 The electronic device is protected by the shielding cover, and the output line is equipped with a magnetic ring, which greatly reduces electromagnetic interference and ensures the normal operation of the receiver 4 It has a protection function to prevent the polarity of the power supply from being reversed. If the power supply is accidentally reversed, it will not cause damage to UBEC
Advantages compared with traditional BEC: Compared with BEC with linear voltage regulator, the advantages of BEC with switching power supply mode are mainly reflected in: when using more than 3 strings (11.1V) batteries, it can greatly reduce BEC heating and improve overall efficiency. For example: when using 4 strings of lithium batteries, the voltage is about 14.8V in normal use.
a??Using the transmission linear voltage stabilization method, to output a current of 5V/1A, the power supply terminal must also input a current of 1A. So there will be 14.8V??1A= 14.8W power consumption on BEC, but the actual useful output of BEC is only 5V??1A=5W, so the overall efficiency is only 5/14.8= 33.8%, and the power consumption of 9.8W is converted into Heat, so it will cause the BEC to overheat, the chip enters the protection state and cannot work; a??Using switching power supply mode, to output 5V/1A current, our actual test shows that the power supply terminal only needs to input 0.38A current, that is, 14.8V??0.38A= 5.6W power
Specification UBEC-7A? Operating voltage: 5.5v-35v lipo 2s-8s Continuous Current: 6A Instantaneous current: MIN 7.5A 20 sec Output voltage: 5.25V +/- 0.5V Weight: 18g
Package Included 1 x UBEC?
