SEQURE SQ-SW1 Mini Intelligent DIY Spot Welder OLED Automatic&Manual Switching Lithiu... (NUMBER: B)

SELECTED OPTION:
NUMBER: B

Product?introduction

Nowadays, lithium batteries are widely using in the electronic products, rechargeable batteries, electric vehicles, balance vehicles, aircraft models, ship models, electronic tools and so on. Due to the diversity of battery shape and volume and the limitation of power supply mode, the traditional welding machine lacks flexibility. SQ-SW1 is battery powered, OLED display can show high and low voltage warning. Using the new spot welding technology, and intelligently switching automatic or manual working mode to meet different needs. It is a flexible and efficient welding tools.

Technical?Parameters

1.?Input?Voltage:?10-14V
2.?Welding?Thickness:?0.1-0.3mm
3.?Trigger?Delay:?0.5-3s
4.?Screen?Flip:?180?ﾣ
5.?Pulse?Time:?1-100ms(default),1-500ms???setting???
6.?Short?Pulse:?0-100%
7.?Work?Model:?Automatic/Manual
8.?Voltage?Warning:?Low?Voltage/High?Voltage
9.?Power?Supply?Interface:?XT90
10.Recommended?Battery:?Lithium?battery?(3S?5000mAh?minimum?60C)?Car?battery?(12V?400-800CCA)

Safety Tips

1. The two electrodes and solder pins should not be touched together to avoid short circuits.
2. Pay attention to the correct wiring. Refer to the manual for the specific wiring method.
3. When using for the first time, set the welding pulse duration to 2ms and check the welding result. According to the actual welding situation, set the appropriate welding pulse duration step by step to obtain good welding.
4. If you use higher current or non-factory parts, you need to take the risk yourself.


Package?description ???lithium battery no included)

Package?one
1??Host
1??welding?pen
1??nickel?belt
1??foot?pedal
2??Solder?pin
2????battery?holder

Package?two
1??Host
1??One-piece?soldering?pen
1??nickel?belt
2??Solder?pin
2????battery?holder