This item has closed with no items sold
View the relisted Item
View the relisted Item
View other items offered by szulou1684
Similar products
2Pcs 4 Bits Digital Tube LED Display Module Board With Clock
New
R377.00
Closed
11 May 24 00:03
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
612366503
2Pcs 4 Bits Digital Tube LED Display Module Board With Clock For
Features:
The module is a 10 foot with a clock point, with four common anode tube (0.36 inch) display module for driver IC 595, only two signal lines can make the MCU control 4 digit 7 segment digital tube.
It has 24 hour timing error correction settings, can set every 24 hours error correction, setting range is -9 to 9 seconds. (Note: To make this effective, it must be 24 hours of continuous power)
4 display modes: A. display time; B. display data; C. display temperature; D. alternate display time, data and temperature.
Specification:
Size: 42 x 24 x 12 mm
Temperature display range: -9 to 60?ﾣC
Temperature error correction setting feature, set the range: -5 to 5?ﾣC
Working voltage: 3.3V~5V. (Note: the lower the voltage, the lower the luminance, the lower the power consumption)
Package included:
2 x LED display module board
?
, 
Features:
The module is a 10 foot with a clock point, with four common anode tube (0.36 inch) display module for driver IC 595, only two signal lines can make the MCU control 4 digit 7 segment digital tube.
It has 24 hour timing error correction settings, can set every 24 hours error correction, setting range is -9 to 9 seconds. (Note: To make this effective, it must be 24 hours of continuous power)
4 display modes: A. display time; B. display data; C. display temperature; D. alternate display time, data and temperature.
Specification:
Size: 42 x 24 x 12 mm
Temperature display range: -9 to 60?ﾣC
Temperature error correction setting feature, set the range: -5 to 5?ﾣC
Working voltage: 3.3V~5V. (Note: the lower the voltage, the lower the luminance, the lower the power consumption)
Package included:
2 x LED display module board
?
,