R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable. Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Product parameters: LED lamp beads: 3xT6+2xXPE+2xCOB Number of lamp beads: 7 Color temperature: 7000K Material: ABS+Aluminum Alloy Battery: 2x18650 lithium battery Charging interface type: MICRO USB Input: 5V/1A Illumination gear: Right button: 3T6 white light, 2XPE white light, 5 light white light, 5 light white light flash; Left key: 2COB white light intensity, 2COB white light weak,-2COB red light, -2COB red light flash. Whether to adjust the focus: no Lighting distance: 200-300 meters Application areas: cycling/expedition/camping/climbing/running/etc Waterproof rating: IPX5 Standard color: black and blue
Instructions for use: 1. Check the battery: make sure that the battery is charged and the flashlight is installed in the correct direction; 2. When using the headlight, choose according to the voltage and battery requirements of the torch. Do not use it indiscriminately to prevent the circuit board from burning. Do not use batteries of different models and voltages at the same time; 3. In use, when the brightness of the headlight changes significantly, turn off the headlight to prevent over-discharge of the battery and charge it in time; pay attention to the waterproof, moisture-proof, drop-proof, etc. of the battery, and charge according to the charging speed of the charger , After the indicator light changes, take it out in time, don't overcharge; 4. If the battery is not used for a long time, the battery should be fully charged and taken out for storage. Normally, it should be charged and discharged again in about three months to avoid chemical corrosion; 5. Keep the inner wall of the lamp cup clean. Do not wipe it with your hands or hard objects. To clear the fingerprints on the lens, you can wipe it gently with a cotton swab dipped in lens cleaner; 6. Do not keep the headlamp in contact with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the headlamp; 7. Non-professionals should not disassemble it to prevent damage to the circuit board structure.