7V 1.4W Solar Powered Floating Birdbath Water Fountain Pump LED Pond Pool Decor
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
612364056
Specification *LED: 4 LED Beads (Multicoloured) *Solar Panel: 7V / 1.4W *Diameter of Solar Panel: 16cm (6.3 inches) *The Power of Pump: 3.5V-12V *Maximum Flow Quantity of Pump: 200 L/H *Battery: Li 3.7V / 1500mAh *The Life Time???a???10,000 Hours *Lift Height???55cm
Notice Spray height: 55cm, connect different spray heads, the spray height will be different. When the solar panel receives sufficient sunlight, the pump will start within 3 seconds. Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally. When the pump is just placed in the water, there is air in it, which may affect the spray effect. It is recommended to wait for the pump to spray normally before connecting the nozzle. This product has no external battery, and the height of the water spray depends entirely on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity after the pump resumes continuous operation.
Install 1.No extra screws and no plugs is needed. 2.Put the pump totally in the water with ita??s nozzle over the water, be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration. 3.Plug the jack of pump in the jack of solar panel output. 4.Put the solar panel under enough sunlight and then it will star to work
Tips of Using the Solar Pump 1. Clean the pump regularly to avoid pump from getting stuck. 2. Don`t make the pump work without water for a long time, or its lifespan will be shortened. 3. The pumps will work continuously only under bright sunshine. It will also be affected by weather, seasons, places, etc.
Operation suggested 1. Remove the film which covers the solar panel before using; 2. Solar panel must be fully exposed in sunlight without any part shaded by leaves or any other things; 3. Let the solar pump under enough sunshine and water height depends on the strength of the sunlight. 4. Pull out of the plug(the head part) firstly, and make the pump work for seconds to let the air go out of the pump, then put on the plug to see if it could work well.
Package included 1 x Solar Power Panel 1 x Brushless DC Water Pump (with power wire) 3 x Spray Head 4 x Filter?
Notice Spray height: 55cm, connect different spray heads, the spray height will be different. When the solar panel receives sufficient sunlight, the pump will start within 3 seconds. Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally. When the pump is just placed in the water, there is air in it, which may affect the spray effect. It is recommended to wait for the pump to spray normally before connecting the nozzle. This product has no external battery, and the height of the water spray depends entirely on the strength of the sunlight. When the sunlight is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity after the pump resumes continuous operation.
Install 1.No extra screws and no plugs is needed. 2.Put the pump totally in the water with ita??s nozzle over the water, be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration. 3.Plug the jack of pump in the jack of solar panel output. 4.Put the solar panel under enough sunlight and then it will star to work
Tips of Using the Solar Pump 1. Clean the pump regularly to avoid pump from getting stuck. 2. Don`t make the pump work without water for a long time, or its lifespan will be shortened. 3. The pumps will work continuously only under bright sunshine. It will also be affected by weather, seasons, places, etc.
Operation suggested 1. Remove the film which covers the solar panel before using; 2. Solar panel must be fully exposed in sunlight without any part shaded by leaves or any other things; 3. Let the solar pump under enough sunshine and water height depends on the strength of the sunlight. 4. Pull out of the plug(the head part) firstly, and make the pump work for seconds to let the air go out of the pump, then put on the plug to see if it could work well.
Package included 1 x Solar Power Panel 1 x Brushless DC Water Pump (with power wire) 3 x Spray Head 4 x Filter?
