Blackstar Dept. 10 AMPED 2 Compact Pedal - Red & Black (Each)

Blackstar Dept. 10 AMPED 2 Compact Pedal - Red & Black (Each)

Description:

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it's equally at home in the studio or the stage.

Key Details:

• 100w Performance ready amp with multi effects.
• Unique high-headroom design that automatically matches
  to the speaker impedance to deliver maximum power and
  optimum tone with any 8 or 16Ohm cabinet set-up.
• Response control delivers three distinctly different and
  authentic power valve responses EL34, 6L6 and EL84.
  Each setting delivers the response, dynamics, sag and
  break-up characteristics of the selected valve power amp.
• Choose from USA, UK and Classic Amp voicings to dial in
  your perfect tone.
• 3 drive voices Boost, Drive and Fuzz.
• Effects include Modulation, Delay and Reverb.
• Pro connectivity and integration into your setup using
  low latency USB audio as an interface for recording, TRS
  stereo line out and XLR Mono D.I. for live use.
• Effects loop, 2x 9V DC outputs and MIDI control for easy
  integration into your pedalboard or rig.
• On board Chromatic Tuner allowing for tuning on the fly
  during live performances.

100W Amp + FX in a Compact Pedal

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it's equally at home in the studio or the stage.

High Headroom Power Amp Design

The power amplifier's unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar's patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.

Speaker Simulator and Direct Outputs

Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.

Advanced Effects Processor

Four studio quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay and Reverb) provides unparalleled versatility.

Reverb, Delay and Modulation With Freeze/Emphasis Effect

The Reverb type, time and level can be customised on the front panel of the amplifier. The Reverb tone can be customised using Blackstar's Architect deep-editing software and saved to the Dept. 10 AMPED 2 in place of the default reverb. When the Reverb is active, holding the Reverb footswitch will activate the 'Freeze' effect.

The Delay type, time, feedback and level can be customised on the front panel of the amplifier. The Delay pedal can be placed pre or post the Amplifier section using Blackstar's Architect deep-editing software. The Delay trails can also be turned on or off using Blackstar's Architect software. When the Delay pedal is active, holding the Delay footswitch will activate the 'Freeze' effect.

The Modulation type, time, depth and level can be customised on the front panel of the amplifier. When the Modulation pedal is active, holding the Modulation footswitch will activate an 'Emphasis' effect. The current settings of the selected Modulation type will be emphasised, with the result being a more intense effect.

Universal Voltage

Dept 10. AMPED 2 is universal voltage so can be used anywhere in the world from 100V to 240V ~ 50/60Hz. Just stick it in your gigbag and hop on that plane.

Authentic Valve Amp Feel

The unique power amplifier design uses current feedback which mimics a valve amplifiers interaction with a speaker cabinet. This very high headroom design delivers the thump and presence of a valve amp with 100W power, into any speaker cabinet at 8 or 16 Ohms.

Specifications:

DEPT. 10 AMPED 2
POWER: 100W
TYPE: Digital with Class D Power Amp
VOICE: USA, UK, Classic
EQ: Bass, Middle, Treble
POWER REDUCTION: 100W, 20W, 1W
RESPONSE: EL84, EL34, 6L6
DRIVE: Drive, Type (Boost, Drive, Fuzz), Tone, Level
MODULATION: Time, Type (CH/FL, Tremolo, Phaser), Depth, Level
DELAY: Time, Type (Linear, Analogue, Shimmer), Feedback, Level
REVERB: Time, Type (Room, Spring, Plate), Level (more settings via Architect)
USB AUDIO: Yes (4 channel)
XLR CABRIG OUTPUT: Yes
EFFECTS LOOP: Yes (series or parallel selectable in Architect)
MIDI CONTROL: Yes
SPEAKER OUTPUTS: 8 Ohm, 16 Ohm
9V DC OUTPUTS: 2 (maximum combined current 500mA)
VOLTAGE: 100V to 240V ~ 50/60Hz
WEIGHT: 1.96kg
DIMENSIONS: 288 x 80 x 149 (mm)