This item has closed with no items sold
View the relisted Item
View the relisted Item
View other items offered by szulou1654
Similar products
Deek-Robot W-1213 Intelligent Digital Display Fish Tank Climbing Pet Greenhouse Planting Hatching an
New
R535.00
Closed
11 May 24 00:03
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
612367733
Product parameter:
Product name: Intelligent temperature controller
Product model: W-1213 Power supply voltage: AC110-220V Working frequency: 50HZ Temperature range: -40?ﾣC~+120?ﾣC Temperature measurement accuracy: ±0.5?ﾣC Sensor cable length: 100CM Size: 79.5*43*35mm Shell material: surface shell ABS, bottom shell flame retardant ABS Battery: CR1220 3V button battery(not included)
Display panel description:
Heat (corresponding icon display): heating mode, in heating mode, heating?the relay works. Cool (corresponding icon display): Cooling mode, in cooling mode, cooling?the relay works. Timer: Timer switch, in timer mode, the icon flashes? OBJ LOW: Set lower limit of target temperature OBJ HIGH: target temperature setting upper limit Horizontal marquee: increasing. Going up means heating decreasing and going down means cooling
Key Description:
1. Power button a??In the power-on state, long press to power off a??In the shutdown state, long press to turn on a???In the setting mode, short press to confirm and press again to return to the home page display?temperature.
2. Set key a??Long press to enter the setting mode option a??In the setting mode option, short press to confirm the currently selected setting mode.
3. Minus key In the setting mode interface, short press-times to subtract 1, long press to continue to subtract In the non-setting interface, long press to cancel the timing time.
4. Add key In the setting mode interface, short press--times to increase by 1, long press to continue to increase. In the non-setting interface, short press to view the timer shutdown time setting value, long press?timing.
5. Combination keys Setting key + number minus (restore factory settings) In the power-on state, pressing the key combination at the same time will restore the factory settings (long press)
Mode description:
Under normal operation, the LCD screen displays the real-time measured value of the current temperature, and
Automatic recognition and conversion of cooling and heating working modes.
1. Cooling mode: a??When the real-time temperature a??? the target temperature upper limit setting value, enter the cooling mode Type, the Cool indicator icon is on, the marquee decreases, and the refrigeration relay works. a??When the refrigeration temperature drops to the lower limit set value of the target temperature, the refrigeration relay The thermostat stops working, and the thermostat enters the temperature control state, and the temperature control range is the target temperature?upper and lower limit setting value. a???When the refrigeration temperature rise value a??? the target temperature upper limit setting value, the snowflake mark The logo starts to flash, the thermostat enters the press delay state, and the press delay time is over.?The cold relay only starts to work, (press delay time can be set)
2. Heating mode: a??When the real-time temperature a??? the lower limit set value of the target temperature enters the heating state, The Heat indicator icon lights up, the marquee increases, and the heating relay works. a??When the heating temperature reaches the target temperature upper limit setting value, the heating relay stops Stop working, the marquee stops, the thermostat enters the temperature control state, the temperature control range is the target?standard temperature upper and lower limits.
3. Timing on/off mode: a??Set the scheduled shutdown time in the power-on state through the number plus key. In the timer mode, you can turn off the timer shutdown function by long pressing the plus button a??Through the number minus key, set the timing power-on time in the off state, In the timer mode, you can turn off the timer boot function by long pressing the minus button.
Notes: a??In normal mode, short press the power button or plus button to view the setting parameters, 1 second?back to normal mode later. a??In the setting mode, if no button is pressed, it will automatically return after 10 seconds?normal working mode. a???In the setting mode, when a certain option value is set, if the setting is not pressed?Press the key or power key to confirm and return, and automatically return to normal working mode after 10 seconds?When, the value will not be saved.
Package Included:
1 x Digital Display Temperature Humidity Controller
Product name: Intelligent temperature controller
Product model: W-1213 Power supply voltage: AC110-220V Working frequency: 50HZ Temperature range: -40?ﾣC~+120?ﾣC Temperature measurement accuracy: ±0.5?ﾣC Sensor cable length: 100CM Size: 79.5*43*35mm Shell material: surface shell ABS, bottom shell flame retardant ABS Battery: CR1220 3V button battery(not included)
Display panel description:
Heat (corresponding icon display): heating mode, in heating mode, heating?the relay works. Cool (corresponding icon display): Cooling mode, in cooling mode, cooling?the relay works. Timer: Timer switch, in timer mode, the icon flashes? OBJ LOW: Set lower limit of target temperature OBJ HIGH: target temperature setting upper limit Horizontal marquee: increasing. Going up means heating decreasing and going down means cooling
Key Description:
1. Power button a??In the power-on state, long press to power off a??In the shutdown state, long press to turn on a???In the setting mode, short press to confirm and press again to return to the home page display?temperature.
2. Set key a??Long press to enter the setting mode option a??In the setting mode option, short press to confirm the currently selected setting mode.
3. Minus key In the setting mode interface, short press-times to subtract 1, long press to continue to subtract In the non-setting interface, long press to cancel the timing time.
4. Add key In the setting mode interface, short press--times to increase by 1, long press to continue to increase. In the non-setting interface, short press to view the timer shutdown time setting value, long press?timing.
5. Combination keys Setting key + number minus (restore factory settings) In the power-on state, pressing the key combination at the same time will restore the factory settings (long press)
Mode description:
Under normal operation, the LCD screen displays the real-time measured value of the current temperature, and
Automatic recognition and conversion of cooling and heating working modes.
1. Cooling mode: a??When the real-time temperature a??? the target temperature upper limit setting value, enter the cooling mode Type, the Cool indicator icon is on, the marquee decreases, and the refrigeration relay works. a??When the refrigeration temperature drops to the lower limit set value of the target temperature, the refrigeration relay The thermostat stops working, and the thermostat enters the temperature control state, and the temperature control range is the target temperature?upper and lower limit setting value. a???When the refrigeration temperature rise value a??? the target temperature upper limit setting value, the snowflake mark The logo starts to flash, the thermostat enters the press delay state, and the press delay time is over.?The cold relay only starts to work, (press delay time can be set)
2. Heating mode: a??When the real-time temperature a??? the lower limit set value of the target temperature enters the heating state, The Heat indicator icon lights up, the marquee increases, and the heating relay works. a??When the heating temperature reaches the target temperature upper limit setting value, the heating relay stops Stop working, the marquee stops, the thermostat enters the temperature control state, the temperature control range is the target?standard temperature upper and lower limits.
3. Timing on/off mode: a??Set the scheduled shutdown time in the power-on state through the number plus key. In the timer mode, you can turn off the timer shutdown function by long pressing the plus button a??Through the number minus key, set the timing power-on time in the off state, In the timer mode, you can turn off the timer boot function by long pressing the minus button.
Notes: a??In normal mode, short press the power button or plus button to view the setting parameters, 1 second?back to normal mode later. a??In the setting mode, if no button is pressed, it will automatically return after 10 seconds?normal working mode. a???In the setting mode, when a certain option value is set, if the setting is not pressed?Press the key or power key to confirm and return, and automatically return to normal working mode after 10 seconds?When, the value will not be saved.
Package Included:
1 x Digital Display Temperature Humidity Controller
