DIY Paintless Dent Dings Repair Lifter Tools Kit For Car Doors
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Free collection from
Hennopspark, Centurion
The seller allows collection for this item and will be in contact with the full collection address once the order is ready.
Ready for collection by Thursday, 2 May.
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Product information
Condition:
New
Location:
South Africa
Product code:
EDA0030905
Bob Shop ID:
608846273
Hail damage, door dings, and other cosmetic damages are quickly massaged out with this extensive paint-less dent repair kit. This kit has been specially designed to fit in confined spaces where a typical hammer and dolly won't reach.
Not only utilized for car dent removal, but also for motorcycles, refrigerators, washing machines, metal cabinet doors etc.
Instructions for use:
- Clean the dent with a clean wet cloth.
- Mount the glue stick into a glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.
- Use a proper drawing gasket. Large dent requires a large drawing gasket.
- Pull the trigger and apply the drawing gasket with extruded glue.
- Fast place the drawing gasket with hot melted glue at the center of dent, press lightly until the glue cures.
- Align the T-shaped repairer and press the drawing gasket with hot melted glue, pull the sliding rod backwards to pull up the dent.
- Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
- Clean the repaired place with a clean wet cloth.
What's in the box
- 1 x 2 in 1 Puller
- 1 x Puller Connector
- 4 x Aluminium Alloy
- 3 x Glue Sticks (11mm x 270mm)
- 1 x Towel
- 2 x Shovels
