View the relisted Item
Similar products
Flipsky 2.4G Screen Remote Control VX3 Transmitter for Electric Skateboard Ebike Eboat Compatible wi
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
Description:
Brand:Flipsky
1. Power on and off?
Power on: Press power on/off?button for 2 seconds, the screen of the remote?lights up FLIPSKY (LOGO) and vibrates, then the remote is successfully powered on.
Power off: In the power on state, press the button for 2 seconds, and the remote?screen displays POWER OFF and vibrates, indicating that the remote is off.
In non-cruise mode, the remote?will automatically power off in 10 minutes?without any operation.
?
2.How to Pairing?
Note: The remote will not work unless it`s paired with the receiver.
(1): The remote power on, long press the setting button for 2 seconds, then the remote comes to?parameters?setting mode.
(2):Shortly Press Setting button and shift setting options to?Pairing, then press setting button until ?????Pairing??????becomes blinking and then?loosing your finger pressing?and now the remote will get in Pairing Mode.
(3): Power on the receiver (means?power on the skateboard, if the skateboard is on, turn off it, then repower on it), the remote controller will pair with the receiver, and the screen displays Pairing succeeded, which means the pairing is successful;?
Power on the receiver and then the remote and receiver will be pairing;?If the screen shows Pairing succeed?then pairing succeed.
Reminds: In step 3, if the receiver does not stay on for 10 seconds and turns to blink??¯??and the screen keeps blinking status and does not show Pairing succeed??¯?? that means pairing failure and will exit pairing mode.?Please re-power on the receiver and keep pairing.?If the signal light is blinking, pairing failed, retry from step1-step3.
?
3 Connection Status
(1) R is displayed on the upper left corner of the remote?screen, and the signal bar is displayed on the right side of R, and the LED signal light of the receiver is always on, it means that the remote control and the receiver are connected and the communication is normal;
(2) R is not displayed in the upper left corner of the remote screen, and NO signal bar is displayed on the right side of R, and the receiver`s LED signal light flashes, indicating that the remote control and the receiver are NOT connected and CANNOT communicate.
?
4 .Acceleration/ Brake/ Switch speed mode
Pull?the?throttle backward?to speed up, and the throttle progress bar at the bottom of the screen will increase; push?the brake?forward?to brake.
Switch speed mode: High, Medium,?Low?Speed; Quickly press the setting button to switch the speed?mode.
H???High Speed
M???Medium Speed
L???Low Speed
Notes: the remote is default set in High speed mode after powering on.
?
?
?
?
5. Throttle calibration
When using the remote for the first time, perform throttle calibration:
(1) Long press the setting button for 2 seconds to enter the remote parameters?setting mode;
(2) Quickly?press the setting button to switch the setting options, switch to the Throttle Calibrate option, the screen displays the maximum and minimum values of the throttle and brake (Speed is the throttle, Brake is the brake); then long press the setting button?for?2 seconds, a reading box appears below the number, and the remote is in a state of ready for calibration at this time;
(3) Pull the throttle back to the maximum and?release, then push the brake up to the maximum and?release, quickly?press the power on/off button to confirm the calibration, and quickly?press the power on/off button again to exit the setting menu.
?
6. Switch between ESK8 mode and Esurf mode
Note: The?default mode is Esurf mode, which has no brake function, the original brake button is changed to cruise function button!
(1) When the remote?power?on, press and hold the setting button for 2 seconds to enter the remote?parameters?setting mode;
(2) Quickly press the setting button to switch the setting options, switch to the Usage Scenario option, the current selected mode of the remote will be displayed under Usage Scenario, press and hold the setting button until the selected mode flashes, then pull the accelerator or push the brake to select the required mode (Esurf is surfing mode, ESK8 is electric skateboarding mode);
(3) Quickly?press the?power on/off?button to confirm the modification, and then quickly?press the switch button to exit the setting menu.
7. ESC Type selection
VX3 has three types:?FSESC, VESC and Non VESC?, and the?default?mode?is FSESC.
Changing?the ESC mode is as follows:
(1) Long press the setting button for 2 seconds to enter the remote parameters?setting mode;
(2)Quickly?press the setting button to switch the setting options, switch to ESC Type, the screen will display FSESC?mode, press and hold the setting button until FSESC flashes, then pull the accelerator or push the brake position to switch the ESC mode ?¯?? (3) After switching to the required mode, quickly?press the switch button to confirm the selection, and then quickly press the power on/off button again to exit the setting menu.
Note: The??????Non VESC????? ESC mode is PPM communication, and the communication position on the receiver (GND, PPM, 5V on the silkscreen of the receiver control port) must be changed to realize the normal connection of the remote.