Fluke MT-8200-60-KIT Intellitone 200 LAN Toner and 200 probe
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Product information
Condition:
New
Location:
South Africa
Product code:
MT-8200 60-KIT
Bob Shop ID:
611769547
Fluke MT-8200-60-KIT Intellitone 200 LAN Toner and 200 probe, Coax f connector Adapter, 2x RJ11 and 2x RJ45 patch cables, Test leads with alligator clips, 2x lanyards, Quick start guide, 2x 9-volt batteries
Overview:
Get advanced vision for tracing and locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probe to offer digital and analog signaling all in one network toner and probe. That means its equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for tracing and locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Features:
Digital network cable toner and probe traces and locates cables on active network.
IntelliTone digital toning technology:Ends network cable location confusion, decisively rejects noise and false signalsNetwork cable tracer locates cables on active networks, even when terminated at a switchIsolates cable and wiring within a bundle, despite cable bleedConfirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one stepSignal strength indicator LEDs so you can help identify one cable that is bundled with other cablesProbe has built-in pair tester to identify open, shorted and crossed pairsSmartTone analog toning technology:Isolates individual wire pairs precisely by changing tone when shortedEffectively traces and locates voice, audio, and video cablingMoreReject noise and false signalsLocate the correct cable bundleIsolate a cable within the bundle, despite cable bleedTests for continuityIdentify and diagnose 10/100/1 Gb Ethernet link connectivity with NIC / hub indicationIdentify individual wire pairs with new SmartTone analog tuningVerification on twisted-pair installation with CableMap capability which identifies common cable miswire
Specifications:GENERAL SPECSOperating temperature 32 °F to 104 °F (0 °C to 40 °C)Storage temperature -4 °F to +140°F (-20 °C to °C)Operating relative humidity (% RH without condensation) 95 % (50 °F to 95 °F, 10 oC to 35 °C)75 % (95 °F to 104 °F, 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)Vibration Random, 2 g, 5 Hz-500 HzShock 1 m drop testSafety EN 61010-1, Category: NoneAltitude 3000 mEMC EN 61326-1, FCC Part 15 BBattery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61), 20 hours typicalApplications Copper cabling media including, 75 or 50 Ohm Coaxial cable, Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.TONER SPECSDimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)Display LEDControl Thumbwheel switchToner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiringToner frequency IntelliTone signal: encoded digital signalAnalog SmartTone signal: 500 - 1200Hz, 4 songsOuptut power 5 V p-pAuto power down Turns off automatically after 2 1/2 hours of inactivityPROBE SPECSDimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)Display (8) LED indicators, Sync LED indicatorAudio IntelliTone: Microprocessor controlled audio filesAnalog: Detected toner signalControl Thumbwheel switch, volume control wheelTone detection Detects IntelliTone digital signal for Locate, Isolate, and CableMapDetects analog SmartTone signal (500-1200Hz) and other analog toners.Toner interface Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.Auto power down Turns off automatically after 1 hour of inactivity
Overview:
Get advanced vision for tracing and locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probe to offer digital and analog signaling all in one network toner and probe. That means its equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for tracing and locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Features:
Digital network cable toner and probe traces and locates cables on active network.
IntelliTone digital toning technology:Ends network cable location confusion, decisively rejects noise and false signalsNetwork cable tracer locates cables on active networks, even when terminated at a switchIsolates cable and wiring within a bundle, despite cable bleedConfirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one stepSignal strength indicator LEDs so you can help identify one cable that is bundled with other cablesProbe has built-in pair tester to identify open, shorted and crossed pairsSmartTone analog toning technology:Isolates individual wire pairs precisely by changing tone when shortedEffectively traces and locates voice, audio, and video cablingMoreReject noise and false signalsLocate the correct cable bundleIsolate a cable within the bundle, despite cable bleedTests for continuityIdentify and diagnose 10/100/1 Gb Ethernet link connectivity with NIC / hub indicationIdentify individual wire pairs with new SmartTone analog tuningVerification on twisted-pair installation with CableMap capability which identifies common cable miswire
Specifications:GENERAL SPECSOperating temperature 32 °F to 104 °F (0 °C to 40 °C)Storage temperature -4 °F to +140°F (-20 °C to °C)Operating relative humidity (% RH without condensation) 95 % (50 °F to 95 °F, 10 oC to 35 °C)75 % (95 °F to 104 °F, 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)Vibration Random, 2 g, 5 Hz-500 HzShock 1 m drop testSafety EN 61010-1, Category: NoneAltitude 3000 mEMC EN 61326-1, FCC Part 15 BBattery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61), 20 hours typicalApplications Copper cabling media including, 75 or 50 Ohm Coaxial cable, Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.TONER SPECSDimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)Display LEDControl Thumbwheel switchToner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiringToner frequency IntelliTone signal: encoded digital signalAnalog SmartTone signal: 500 - 1200Hz, 4 songsOuptut power 5 V p-pAuto power down Turns off automatically after 2 1/2 hours of inactivityPROBE SPECSDimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)Display (8) LED indicators, Sync LED indicatorAudio IntelliTone: Microprocessor controlled audio filesAnalog: Detected toner signalControl Thumbwheel switch, volume control wheelTone detection Detects IntelliTone digital signal for Locate, Isolate, and CableMapDetects analog SmartTone signal (500-1200Hz) and other analog toners.Toner interface Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.Auto power down Turns off automatically after 1 hour of inactivity