Manual Nozzle Diesel Oil Petrol Dispensing Fuel Transfer Tool
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
612454410
Description:
Manual Nozzle Diesel Oil Petrol Dispensing Fuel Transfer Tool
Specification:
Color: Yellow Port Size: 3/4BSP Flow: 60L/min Pressure: 0.20 Mpa Material: Aluminium alloy, Plastic(handle cover) Size: 400x120mm/15.7x4.7 Application: diesel, kerosene, petrol below 90# ? Features:
(1) The slim shape of the fuel transfer and the balanced weight of the fuel transfer body make the operation easy and labor-saving. (2) The parts are made of aluminum alloy and plastic. With high strength, light weight, wear resistance, corrosion resistance and excellent sealing properties. (3) The fuel transfer is equipped with a bright color plastic sheath, comfortable. ? 2, Install the connector: (1) If the fuel transfer inlet is a NPT (American Standard) tapered thread, seal it with a suitable sealant. (2) If the fuel transfer inlet is BSPT (British standard) straight thread, it must be sealed with a rubber O-ring. (3) Connect the connector to the inlet of the fuel transfer with care. Do not overtighten the threads to prevent the fuel transfer body from cracking. ? 3, Operation: (1) The fuel transfer switch shall be set with 3 fixed gears, which can be refueled according to the flow size. (2) During the refueling process, when the oil or foam submerges the air hole at the lower end of the barrel, the fuel transfer will automatically close. If spray or foam causes the fuel transfer to close, the foam can disappear and fire again. (3) When using the gear to control the refueling, the non-slip spring on the barrel can be used to self-refuel in the tank, without the need for hand-holding, the oil is fully self-closing. ? 4, Maintenance: (1) The vent hole at the lower end of the barrel should be kept clear and blocked by foreign matter. (2) After the fuel transfer is used to put up, avoid collision. (3) Do not need lubrication and durability.
? Package Included:
1 x Manual Refuelling Nozzle with Hook
More Details:
Manual Nozzle Diesel Oil Petrol Dispensing Fuel Transfer Tool
Specification:
Color: Yellow Port Size: 3/4BSP Flow: 60L/min Pressure: 0.20 Mpa Material: Aluminium alloy, Plastic(handle cover) Size: 400x120mm/15.7x4.7 Application: diesel, kerosene, petrol below 90# ? Features:
(1) The slim shape of the fuel transfer and the balanced weight of the fuel transfer body make the operation easy and labor-saving. (2) The parts are made of aluminum alloy and plastic. With high strength, light weight, wear resistance, corrosion resistance and excellent sealing properties. (3) The fuel transfer is equipped with a bright color plastic sheath, comfortable. ? 2, Install the connector: (1) If the fuel transfer inlet is a NPT (American Standard) tapered thread, seal it with a suitable sealant. (2) If the fuel transfer inlet is BSPT (British standard) straight thread, it must be sealed with a rubber O-ring. (3) Connect the connector to the inlet of the fuel transfer with care. Do not overtighten the threads to prevent the fuel transfer body from cracking. ? 3, Operation: (1) The fuel transfer switch shall be set with 3 fixed gears, which can be refueled according to the flow size. (2) During the refueling process, when the oil or foam submerges the air hole at the lower end of the barrel, the fuel transfer will automatically close. If spray or foam causes the fuel transfer to close, the foam can disappear and fire again. (3) When using the gear to control the refueling, the non-slip spring on the barrel can be used to self-refuel in the tank, without the need for hand-holding, the oil is fully self-closing. ? 4, Maintenance: (1) The vent hole at the lower end of the barrel should be kept clear and blocked by foreign matter. (2) After the fuel transfer is used to put up, avoid collision. (3) Do not need lubrication and durability.
? Package Included:
1 x Manual Refuelling Nozzle with Hook
More Details: