Micro-Tec Lathe D240X500 DC Vario | BL3425006
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 6 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Product information
Condition:
New
Location:
South Africa
Product code:
4507749
Bob Shop ID:
608463167
- Lead screw lathes with feed gear for demanding users
- Precise manufacturing
- Powerful, maintenance free motor
- Heavily ribbed prism bed made of grey cast iron, inductively hardened and precision ground
- Hardened and ground bed guideways
- Guaranteed true running accuracy of the spindle nose better than 0.009 mm
- True running accuracy of the lathe chuck better than 0.04 mm
- Automatic longitudinal/leading spindle drive
- With leading spindle for threading or automatic longitudinal turning
- Right-/left-handed rotation switchable on
- Leading spindle run on two porous bearings
- Handwheels on the slide with adjustable precision scaling of 0.04/0.01 mm
- Change gear kit for thread cutting
- Thrust bearing
- Emergency-stop push button
- Fully equipped machine, the user can immediately start to work productively
Micro-Tec Lathe D240X500 DC Vario | BL3425006
Lead screw lathes with feed gear and infinitely variable speed control for brushless motor
Technical Specifications
| Connection | 230 V / 1 Ph ~50 Hz |
| Driving motor spindle | 1,5 kW |
| Spindle taper | MT 4 |
| Spindle hole | |
| Spindle seat | Short taper |
| Quadruple tool holder Height | max. 13 mm |
| Centre height | 125 mm |
| Centre width | 550 mm |
| Turning over lathe bed | 250 mm |
| Bed width | 135 mm |
| Spindle speed | 30 4,000 min-1 |
| Number of steps | 4 steps, electrically adjustable speed |
| Travel top slide | 70 mm |
| Travel cross slide | 110 mm |
| Longitudinal feed in the range of | 0.07 0.4 mm/U |
| Pitch Metric in the range of | 0.2 4 mm/U |
| Pitch Inch in the range of | 56 8 Gg/1 |
| Tailstock seat | MT 2 |
| Tailstock sleeve travel | 65 mm |
| Dimensions (L x W x H) | 1,250 x 650 x 420 mm |
| Net weight | 125 kg |
Description
- Lead screw lathes with feed gear for demanding users
- Precise manufacturing
- Powerful, maintenance free motor
- Heavily ribbed prism bed made of grey cast iron, inductively hardened and precision ground
- Hardened and ground bed guideways
- Guaranteed true running accuracy of the spindle nose better than 0.009 mm
- True running accuracy of the lathe chuck better than 0.04 mm
- Automatic longitudinal/leading spindle drive
- With leading spindle for threading or automatic longitudinal turning
- Right-/left-handed rotation switchable on
- Leading spindle run on two porous bearings
- Handwheels on the slide with adjustable precision scaling of 0.04/0.01 mm
- Change gear kit for thread cutting
- Thrust bearing
- Emergency-stop push button
- Fully equipped machine, the user can immediately start to work productively
TU 2506 V
- Infinitely variable speed control for brushless motor
- Smooth and high performance DC drive with
excellent control characteristics - High-precision tool chuck for higher speeds
- Speed change easily adjustable via potentiometer
- Digital speed display
Features:
Slide
- Quadruplicate tool holder
- All guideways adjustable via V-ledges free of play
- Rolled trapezoid spindles
- Chip protection at the top slide
- Milling machine BF20V mountable
- Top slide adjustable on cross slide
Tailstock
- Adjustable by 5 mm for taper turning
- Tailstock spindle sleeve and handwheel with adjustable precision scaling
of 0.02 mm - Rapid and easy adjustment of the tailstock by means of a clamping lever
Main spindle
- Hardened and with re-adjustable precision tapper roller bearings
- Two taper roller bearing of P5 quality
- Short taper
- Hardened spindle nose with a spindle hole of 26 mm
Feed gear
- Smooth running
- Rounded toothed wheels
- Running in the oil bath
TU 2506V
Powerful Brushless drive
- Particularly smooth running
- Nearly constant torque over the entire speed range
- High power output
Delivery Information
- 3-jaw lathe chuck 125 mm
- Fixed center MT 2 / MT 4
- HSS lathe chisel
- Quadruple tool holder
- Change gear kit
- Operating tool
