This item has closed 1 buyer bought 1 item
View the relisted Item
View the relisted Item
View other items offered by szulou1566
Self-priming Drill Pump Electric Drill Pump Oil Fluid Water Pump
New
R403.00
Closed
11 Apr 24 01:24
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
609869309
Name: Self-priming Drill Pump Electric Drill Pump Oil Fluid Water Pump
Specifications:
Color:?Black
Material: Engineering plastics
Dimension: 3.5x10.5x6.5cm / 1.4x4.1x2.6
Pump shank: 8mm round shank
Transmission medium: Oil / Water / Fluid
Self-priming: 9ft
Impeller structure: Rubber impeller
Fitment: For electric drill
Feature
- Designed to work with a corded or cordless drill, fits most electric drills; Converts virtually any drill into a high capacity pump capable of emptying sinks, aquariums, pool skimmers and much more.
- Small size, lightweight, and portable, convenient installation; this electric drill powered pump is suitable for home, garden and outdoor.
- For transferring light liquids, such as freshwater, seawater, oil, dilute organic solvents, insecticides, and liquid fertilizers.
- Engineering plastic body and stainless steel internal parts avoid corrosion.
- Self-priming up to 9ft(2.75m) and pumps water out to a maximum distance of 45ft(13.7m); Pumps up to 300 U.S GPH(1136L/hr); Pump connects to 1/2inch(1.3cm) diameter tubing
Operation Instruction:
1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
2. Be sure the inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line.
4. It is recommended that the pump is mounted to a surface for security and ease of use.
5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into the pump in15-20 seconds. If not, check that the inlet tube is properly mounted to inlet.
6. Do not run dry. If the pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on the fluid being pumped for lubrication.
Package included:
1 x Pump
2 x Connector
2 x Clamp
1 x Manual
Specifications:
Color:?Black
Material: Engineering plastics
Dimension: 3.5x10.5x6.5cm / 1.4x4.1x2.6
Pump shank: 8mm round shank
Transmission medium: Oil / Water / Fluid
Self-priming: 9ft
Impeller structure: Rubber impeller
Fitment: For electric drill
Feature
- Designed to work with a corded or cordless drill, fits most electric drills; Converts virtually any drill into a high capacity pump capable of emptying sinks, aquariums, pool skimmers and much more.
- Small size, lightweight, and portable, convenient installation; this electric drill powered pump is suitable for home, garden and outdoor.
- For transferring light liquids, such as freshwater, seawater, oil, dilute organic solvents, insecticides, and liquid fertilizers.
- Engineering plastic body and stainless steel internal parts avoid corrosion.
- Self-priming up to 9ft(2.75m) and pumps water out to a maximum distance of 45ft(13.7m); Pumps up to 300 U.S GPH(1136L/hr); Pump connects to 1/2inch(1.3cm) diameter tubing
Operation Instruction:
1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
2. Be sure the inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line.
4. It is recommended that the pump is mounted to a surface for security and ease of use.
5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into the pump in15-20 seconds. If not, check that the inlet tube is properly mounted to inlet.
6. Do not run dry. If the pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on the fluid being pumped for lubrication.
Package included:
1 x Pump
2 x Connector
2 x Clamp
1 x Manual
