Tirol 13 Pin Towing Light Circuit Diagnostic Tester Signal Plug Socket for Trailer Caravan Truck
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
612464276
Description:
This tester connect 13-pins plug of trailer between 13-pins socket of a car.
It helps to diagnostic follow?problem:
1. Some LED do not light up.??
2. None of the LED light up.???
3. One or more LED are weak or twinkle.???
4. All the LED are weak or twinkle.???
5. The lights of the trailer do not light up but the LED do.
Specification:
Instrument :
1. Put the tester in the socket of the car.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LED light up. Do again steps 4 as previous.
Tip:
You can also test the functions of each pin of the socket.
1. Switch on the left hand indicator (after switching on the ignition?key).
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken.
3. Repeat steps 1 and 2 for the right hand indicator, rear-light, fog-light?and stoplights.
4. With a +/- 4 m extension cable, you can test the functions form the drivera??s seat more easily.
Package Included:
1 X Trailer?Tester
This tester connect 13-pins plug of trailer between 13-pins socket of a car.
It helps to diagnostic follow?problem:
1. Some LED do not light up.??
2. None of the LED light up.???
3. One or more LED are weak or twinkle.???
4. All the LED are weak or twinkle.???
5. The lights of the trailer do not light up but the LED do.
Specification:
| Brand?Name? | Tirol |
| Number | T23331 |
| Name? | Trailer?Tester |
| Material? | ABS+?copper |
| Type? | 13?Pin |
| Applicable | Diagnostic?Tools |
| Color | Black |
| Weight? | 220g |
| Size? | 20.5x4.5x5.5cm |
Instrument :
1. Put the tester in the socket of the car.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LED light up. Do again steps 4 as previous.
Tip:
You can also test the functions of each pin of the socket.
1. Switch on the left hand indicator (after switching on the ignition?key).
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken.
3. Repeat steps 1 and 2 for the right hand indicator, rear-light, fog-light?and stoplights.
4. With a +/- 4 m extension cable, you can test the functions form the drivera??s seat more easily.
Package Included:
1 X Trailer?Tester
