UPS 12V 10A Power Inverter for DVR, MODEM, CCTV etc
Secondhand
Indicative market price: R750
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
Secondhand
Location:
South Africa
Product code:
UPS 12V 10A Power Inverter Q-UP1210 for DVR, MODEM, CCTV etc
Bob Shop ID:
611634664
UPS 12V 10A Power Inverter for DVR, MODEM, CCTV etc
OUTPUT: 12V 10A (4CH)
1.)Mount the enclosure in a selected location where it is out of sight and protected from moisture and water.
2.) Knock out the appropriate knockouts for running cables.
3.) Turn the power switch to OFF position.
4.) Connect all cameras power cable to individual protected outputs
5.)Plug the AC plug into AC100-240V power outlet. Turn power switch to ON position.
The green LED light should be on.
6.) Close the cover and secure it with the provided screw.
7.) The individual PTC fuse is rated at 60V/2A( 4 outputs - 5A )and (9 outputs 10A)
60V/1 1A (4 outputs - 3A) .(9 outputs - 5A ) and (18 outputs - 10A )
8.) The wire for backup battery , red color is for positive. Black color is for negative.
9.) "Bus Output" isn't available.
What's in the box
1 x 12V 10A Power Inverter
1.)Mount the enclosure in a selected location where it is out of sight and protected from moisture and water.
2.) Knock out the appropriate knockouts for running cables.
3.) Turn the power switch to OFF position.
4.) Connect all cameras power cable to individual protected outputs
5.)Plug the AC plug into AC100-240V power outlet. Turn power switch to ON position.
The green LED light should be on.
6.) Close the cover and secure it with the provided screw.
7.) The individual PTC fuse is rated at 60V/2A( 4 outputs - 5A )and (9 outputs 10A)
60V/1 1A (4 outputs - 3A) .(9 outputs - 5A ) and (18 outputs - 10A )
8.) The wire for backup battery , red color is for positive. Black color is for negative.
9.) "Bus Output" isn't available.
What's in the box
1 x 12V 10A Power Inverter