Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Description:
Item Brand:Flipsky
Item Number:7550
Item Name:FSESC 50A
Material:Aluminum(only the case) and other electronic parts
Color:As shown
Product Size:ESC is about 78*59*32.5mm
Product Weight:Approx.200g
Application:RC Cars,robots and other models
Spec:
Voltage:14???75V (3???16S safety)
Current:Continuous current 50A,Instantaneous current: 160A
Support Sensors:ABI, HALL, AS5047, AS5048A
EPRM:150000
Regenerative braking
Input source:PPM, analog, NRF NYKO KAMA NUNCHUCK
Communication Ports:USB, CAN, UART;
Motor Wire:12 AWG
Power Cable:12 AWG
Features:
Support BLDC square wave mode control and FOC sine wave mode
The CPU adopts STM32F405 with a main frequency of 168MHz and a Cortex-M4 architecture with DSP function
High current 75V Infineon mosfets in 6 Directfet packages
Three high-power, high-precision copper current sampling resistors are used to directly measure the three phases current to achieve FOC control and overcurrent protection
Use TI`s UCC272XX series of high-current output gate drivers to drive 6 MOSFETS
Use three 470UF withstand voltage 100V electrolytic capacitors to ensure the stability of the system under high current drive
Support with Hall, without Hall, with sensor, and without sensor
Throttle curves and slopes of all input sources, seamless four-limit operation, count of motor revolutions, ampere-hours, watt-hours, real-time data analysis and readout through the communication port
The digital VCC and analog VCC are generated by different voltage regulators, which makes the system`s AD conversion more accurate
With the host computer tool software, it can automatically measure the winding resistance, inductance, flux linkage, and also measure the number of pole pairs and other parameters for the motor with sensors
Adjustable protection measures: low input voltage/high input voltage/large motor current/high input current/over-temperature protection (MOSFET and motor)
High regenerative braking current (separate limit for motor and input), high RPM (different limit for each direction), nearly one hundred setting parameters can be changed through the USB port using the host computer software VESC_TOOL and kept in the ESC
Package Included:
1X 75V FSESC
Wiring Diagram: