Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Earth Resistivity & Resistance Tester, CAT III 300V
High test current up to 80mA yielding resolution of 0.001 on 2 range.
Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements.
Earth resistance measurement with 4, 3 and 2 wires
Earth resistivity tester () using 4 pole Wenner method
800 Data storage points
Test current frequency in four bands of 94 / 105 / 111 / 128Hz
Earth (Ground) Resistance 200k
Earth Soil Resistivity 200k
"Zero adjust" the Residual Resistance (Rk)
Soil Earth Resistivity is automatically calculated
Distance set within a range of 1.0 to 30.0m at 0.1m steps
Several sub-results and parameters can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
Memory, recall and download results via USB adaptor
Warning indication of noise & high resistance of auxiliary earth spikes
Robust design with IP54 protection
The K4106 is a 2/3/4-wire Digital Earth resistance/Earth Resistivity Tester equipped with a microcomputer and can measure earth resistances and calculate earth resistivity's (), using the "Wenner " 4 pole method. This instrument is ideal for Earth measurements also in large Earthing systems because it uses a considerable test current of 80mA(max) yielding a high resolution of 1m on 2 range. The Earth Resistivity measurement is useful for soil surveys to establish the optimum earth electrode system design and site, to avoid extra cost of reworking electrode installations. It can also be suitable for geological investigations.