20pcs 0.28 Inch Two-wire 2.5-30V Digital Blue Display DC Voltmeter Adjustable Voltage Meter
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615106454
Feature:
1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected. 2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is two-wire 2.50-30V, three-wire 100V. 3. Wide voltage operation, red 2.50V low and safe pressure up to 40V, more than 40V may be damaged. 4. When measuring voltages below 10V, two digits are displayed after the decimal point; when measuring voltages above 10V, one digit is displayed after the decimal point.
Package includes:
20 x Voltage meter
1. The wiring of this voltmeter is simple. The conventional two wires are used, the red is connected to the positive, the black is connected to the negative, and the reverse connection is protected. 2. Conventionally, no external working power supply is required, and the measuring voltage can be directly operated. The measuring voltage range is two-wire 2.50-30V, three-wire 100V. 3. Wide voltage operation, red 2.50V low and safe pressure up to 40V, more than 40V may be damaged. 4. When measuring voltages below 10V, two digits are displayed after the decimal point; when measuring voltages above 10V, one digit is displayed after the decimal point.
| Measuring range | Two-wire DC2.50~32.0V / three-wire DC0-100V / 500V |
| Power supply range | No need to supply power separately. The measured voltage <40V, higher than 40V may be damaged. |
| Test accuracy | ±1%. >10V error ±0.1V; <10V ±0.03V |
| Input resistance | >50K?? |
| Working current | <30mA |
| Refresh rate | About 100mS once |
| Display specification | Three digit 0.28 LED digital tubes |
| Lead length | Default 20cm |
| Dimensions | 30 x 11.5 x 9 mm |
| Hole Size | Pitch: 26mm Aperture: 2.4mm |
| Net weight | 4g |
| Operating temperature | -10 to +80 ?ﾣC |
| Working humidity | 10 to 80% |
| Working pressure | 80 to 106 kPa |
Package includes:
20 x Voltage meter