M1s Dock Full+Shell

Discover the next generation of projects with the M1s Dock Full+Shell! This nifty hardware development kit is jam-packed with features like the BL808 RISC-V 480Mhz + NPU BLAI-100, onboard USB to UART debugger, and optional 1.69" 240x280 capacitive touch screen.

This product comes as a set which includes:

• Shell(case)
• Screen
• Cable
• Back Cover
• Programming Cable

Sipeed M1s Dock is a development board designed based on the Sipeed M1s modules, routes interfaces like MIPI CSI, SPI LCD, and FPC connector, to get rid of problems with connecting cables. Designed with a minimal design, for customers to evaluate the module, hobbyists to play directly, etc.

Sipeed M1s Dock is a development board designed based on the Sipeed BL808 M1s Module that supports 2.4G WIFI/BT/Bluetooth5 and is equipped with a base of the screen and base of the MIPI camera. Designed with the most minimal design, for customers to evaluate the module, hobbyists to play directly, etc.

Function Block

The above image gives you a good indication of where all the component slots are located on the board as well as where the rest button and the boot button are located.

Pin Map

The above image is the detailed pin out of the board as it shows you the number of each pin as well as the extra functions of each pin as most of the pins on the board have more than one function.

Features

• MainChip BL808 RISC-V 480Mhz + NPU BLAI-100
• Onboard USB to UART debugger
• Onboard screen interface (Optional 1.69-inch 240x280 capacitor touch screen)
• Onboard MIPI camera interface (Optional 2M solution camera)
• Support 2.4G WIFI / BT / BLE
• Onboard 1 analog microphone1 LED1 TF card slot
• Route USB-OTG to USB Type-C port

M1s Dock Full+Shell Specification

• Three RISC-V CPUs: RV64GCV 480MHz, RV32GCP 320MHz, RV32EMC 160MHz
• AI NN general-purpose hardware accelerator: BLAI-100, used for video/audio detection/identification, 100GOPS hash rate
• 768KB SRAM + 64MB UHS PSRAM
• Encode and Decode: MJPEG and H264(Baseline/Main), 1920x1080@30fps + 640x480@30fps
• Interface: Camera interface: DVP and MIPI-CSI
• Display interface: SPI, DBI, DPI(RGB)
• Wireless: Support Wi-Fi 802.11 b/g/n, Support Bluetooth 5.x Dual-mode(BT+BLE), Support Wi-Fi / BT co-existence
• USB 2.0 HS OTG

Onboard components:

• Onboard USB to UART debugger (Used for uart communication and burn firmware)
• Onboard screen interface (Optional 1.69-inch 240x280 capacitor touch screen)
• Onboard MIPI camera interface (Optional 2M solution camera)
• Onboard 1 analog microphone, 1 LED, 1 TF card slot

Others:

• External TYPE-C PORT power supply requirements
  
• 5V10% 0.5A
• Temperature rise: <30K
• Operating temperature:-10 ~ 65

Chip Cores

Three cores in chip: M0, D0, LP.

• M0: T-HEAD E907@320MHz
• D0: T-HEAD C906@480MHz
• LP: T-HEAD E902@160MHz

Documentation

• Datasheet
• More Information