10mm DC12V Miniature Electric Push Rod Telescopic Rod Linear Reciprocating Motor Lifter... (TYPE: 2)
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615094714
SELECTED OPTION:
TYPE: 2
Specifications: Moving distance:10mm Material: Aluminum alloy Speed:? 30mm/s,15mm/s,9.5mm/s
Type1: 9.5mm/s
Type2: 15mm/s
Type3: 30mm/s
Input Voltage: 12V DC Duty cycle: 10%
Technical Parameters: Push bar Each side contains a travel limit switch. When the telescopic bar runs to the top or to the top, it will automatically disconnect the electricity. The motor will not idle. Cut off the power, it can be stop at any position, with self-locking function. The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted without rotation. The motor is positive and negative. For example, if the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it. Ambient temperature -20?ﾣC to +60?ﾣC. Standard protection class: IP54. Low noise design, noise level less than 50dB. Please do not disassemble the machine. Product features: drive other objects to push, pull, rise, drop. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.
Notice: Before use, first recognize whether the motor voltage is correct. If it is a DC motor, then also consider that the power supply current is sufficient. Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency. When soldering is required on the positive and negative power supply`s motor? terminals, the soldering iron temperature is 340?ﾣC±40?ﾣC. Within 3 seconds of heating time. Do not deform the plastic. When installing the motor, pay attention to whether the screws are too long and the? company must not over-press the long screws to the parts inside the motor.
Please note:? Bracket and controllers need to be purchased separately, please search our products in our shop, and purchase the suitable kit.
Package Included: 1??Linear Actuator Motor?
