1 Meter 8K 60Hz| 4K 165Hz | 1080P 240 HZ | HDR HDMI Cable v2.1 (HDMI Patch Lead) | Premium HDMI Cable resolutions
HDMI V2.1, which is backwards compatible with earlier versions of the HDMI specification v2.0, v1.4, v1.3, v1.2 etc, significantly increases bandwidth up to 18Gbps and adds key enhancements to support market requirements for enhancing the consumer video and audio experience.
Tested 100% with all common HDMI sources such as Multichoice DSTV Explora / HDPVR, Sony Playstation Consoles, Microsoft Xbox Consoles, DVD players and Blu-ray Players.
Diameter & Specs on HDMI Cable:
- HDMI Certified: Yes
- HDMI Spec: V2.1
- HDCP Compliant: Yes
- CEC Compliant: Yes
- ROHS Compliant: Yes
- 1.3 Device Compatible: Yes
- Supports DVD Audio: Yes
- Supports SACD: Yes
- Supports TrueHD & DTS-HD: Yes
- Overall Diameter: 8mm
The Indicated Length of the HDMI Cable includes the cable length including the heads and is TOTAL Length of the cable, not the cable length itself between the 2 heads.
HDMI v1.4 vs v2.0 vs 2.1 Comparison Video
?v=_93_KNfkP4M
This CABLE is For:
- Any Device with an HDMI Interface (Backwards Compatible to HDMI V1.0)
- To Connect any BLU-RAY / HD DVD / Multichoice HDPVR to a display or Digital Receiver to provide Audio / Video travelling via the same cable for HD Video/Audio
- Connect your XBOX 360, XBOX ONE / Playstation 3 or 4 Gaming Console to a display / digital receiver with a HDMI interface
- To connect current DVD players with a HDMI interface to a display / digital receiver to allow upscaling of normal DVD resolution to 1080p
HDMI Ethernet Channel technology consolidates video, audio, and data streams into a single HDMI cable, combining the unmatched signal quality and convenience of HDMI connectivity with the power and flexibility of home entertainment networking. It incorporates a dedicated data channel into the HDMI link, enabling high-speed, bi-directional networking at up to 100 Mb/sec.
- HDMI 2.0 includes support for BT.2020 Colorimetry with 10 or more bits of color depth.
- Video Formats defined in BT.2020 and supported by HDMI 2.0 specification:
2160p, 10/12 bits, 24/25/30Hz, RGB/4:2:2/4:4:4
2160p, 10/12 bits, 50/60Hz, 4:2:0/4:2:2
What are the formats supported by HDMI 2.1? All Lower resolutions such as 720p/1080p etc also supported
| 8bit | 10bit | 12bit | 16bit |
| 4K@24 | RGB | RGB | RGB | RGB |
| 4K@25 | 04:04:04 | 04:04:04 | 04:04:04 | 04:04:04 |
| 4K@30 | | | 04:02:02 | |
| 4K@50 | RGB | 04:02:00 | 04:02:02 | 04:02:00 |
| 04:04:04 | 04:02:00 |
| 4K@60 | 04:02:00 | |
| 4k @ 144Hz | | | | |
| 4k @ 165Hz | | | | |
| 1080p @ 240Hz | | | | |
| 8K @ 60hz | | | | |
| | | | |
What's new in HDMI 2.1?
- Resolutions up to 8K@60Hz, which is 5 times the clarity of 1080p/60 video resolution, for the ultimate video experience
- Up to 32 audio channels for a multi-dimensional immersive audio experience
- Up to 1536kHz audio sample frequency for the highest audio fidelity
- Simultaneous delivery of dual video streams to multiple users on the same screen
- Simultaneous delivery of multi-stream audio to multiple users (Up to 4)
- Support for the wide angle theatrical 21:9 video aspect ratio
- Dynamic synchronization of video and audio streams
- CEC extensions provide more expanded command and control of consumer electronics devices through a single control point
Is HDMI 2.1 backwards compatible with HDMI 1.x?
Yes, all HDMI versions are fully backward compatible with all previous versions.
Does HDMI 2.1 require new connectors?
No, HDMI 2.0 uses the existing connectors.
HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON.
