1 Meter Duplex Single Mode UPC LC-LC Fiber Cable | Fiber Optic Patch Cord

1M Duplex Single Mode UPC LC-LC Fiber Cable | Fiber Optic Patch Cord

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors)
• LC/UPC LC/UPC
• G.657A2, 2.0x3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP's below

/20km-single-mode-dual-lc-1-25gbit-1310nm-gigabit-sfp-transceiver-module-cisco-huawei-dell-compatible/

LC Fiber Connectors Explained in Detail

?v=SJwbqnjo4BE

Single Mode Fiber Cable Usage and Instructional Video

?v=7D5DXND3-TI