Name: 1 PC - FlyingRC 10A 12S V1 BEC Step-down Module 5.2V/ 8V/ 12V Output with 35V 220UF Capacitor for RC
SKU: 2050037-POA12384249
Price: 675.71 ZAR
Availability: InStock

1 PC - FlyingRC 10A 12S V1 BEC Step-down Module 5.2V/ 8V/ 12V Output with 35V 220UF Capacitor for RC

New

1 available

Indicative market price: R999.55

Only 1 left – grab it before it’s gone!

R675.71

32% off

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

There are various locker and counter collection points across South Africa.
View locations

The seller has indicated that they will usually have this item ready to ship within 15 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

The World OnLine10362

94.51 % Positive ratings

Buyer protection

How you're covered

Get it now, pay later

Condition

New

Location

South Africa

Product code

2050037-POA12384249

Bob Shop ID

678778882

Specification:

Brand: FlyingRC

Item name: 10A 12S BEC step-down module
Size: 30.4x28x8mm (1.2x1.1x0.31inch)
Product Weight: about 11.3g (without capacitor), 11.9g (with capacitor)
PCB Layers: 4 layers
PCB Thickness: 1.60mm
Immersion Gold: 1m
Electrolytic capacitor: 35V 220UF

Product Features:
- The 10A 12S BEC V1 is a compact, high-performance BEC step-down module. It adopts the TI LM5116 chip with a voltage tolerance of 80V. Equipped with current loop control, it features maximum responsiveness, making it ideal for servo power supply.

- External dual 80V-tolerant MOS enable a maximum instantaneous output current of 12A, with a continuous output of 8A without heat dissipation and 10A with heat dissipation.

- Input Capacitance: 6pcs 1210 10uF MLCC in parallel

- Output Capacitance: 6pcs 1206 47uF MLCC in parallel

- Input Voltage: 6-60V, 2-12S LiPo (input voltage must be 0.8V higher than the set output voltage)

- Output Voltage: Selectable 5.2V, 8V, 12V. Default output is 5.2V; other voltages can be selected via jumper pads.
1. No shorting of jumper pads: default output 5.2V.
2. Shorting of jumper pads: select other output voltages.
(Short-circuit the middle square pad with the 8V pad on the right to output 8V.)
(Short-circuit the middle square pad with the 12V pad on the left to output 12V.)

Continuous Output Current:
1. Without heat dissipation (no heatsink, no airflow): 5.2V8A, 8V8A, 12V7A
2. With heat dissipation (with heatsink or airflow): 5.2V8A, 8V8A, 12V7A
3. Instantaneous Output Current: 5.2V12A, 8V12A, 12V11A

Usage Instructions:
1. Solder the power input wires.
2. Select the output voltage via jumper pads (skip this step if 5V output is required).
- No shorting of jumper pads: default output is 5V.
- Shorting of jumper pads: select other output voltages.
When selecting the 8V pad, the actual output voltage is 8.02V; when selecting the 12V pad, the actual output voltage is 12.02V.
3. Solder the power output wires.
4. Solder the capacitor (capacitor: left is negative, right is positive).

Package included:
1 x BEC Step-down Module
1 x 35V 220UF Capacitor