Name: 100amp SOLAR LCD MPPT REGULATOR AUTO (12-48v) by MICROCARE
SKU: MPPT7
Price: 10135.00 ZAR
Availability: SoldOut
Rating: 5 (1 reviews)

100amp SOLAR LCD MPPT REGULATOR AUTO (12-48v) by MICROCARE

New

10 were available

Indicative market price: R11,685.00

R10,135.00

13% off

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

The seller has indicated that they will usually have this item ready to ship within 10 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

pteradactyl11122

100.00 % Positive ratings

Buyer protection

How you're covered

Returns

Warranty Type: Manufacturer 3 year warranty

Replacement Guarantee: 7 Days: If due to faulty workmanship item will be replaced or repaired and customer will be reimbursed for shipping to supplier.

Get it now, pay later

Condition

New

Location

South Africa

Customer ratings:

1 ratings

Product code

MPPT7

Bob Shop ID

206640881

Why you should consider buying a MICROCARE product:

Proudly South African with 20 years of manufacturing with many units having been sold locally and internationally. Service and repair of the products at a minimum cost due to local manufacture.

MICROCARE 100amp SOLAR LCD MPPT Regulator Auto (12-48v)

Overview:

Microcare MPPT Solar Charge Controllers are proudly South African. The Microcare MPPT utilizes PWM and integrated technology to provide greater than 96% efficiency from your solar panels. The actual charge current increase you will see varies primarily with module temperature and battery voltage. In comfortable temperatures, current increase typically varies between 10 to 25%, with 30% or more easily achieved with a discharged battery and cooler temperatures. What you can be sure of is that the Microcare MPPT charge controller will deliver the highest charge current possible for a given set of operating conditions. The ability to step down a high voltage solar array to a low voltage battery can save you money by reducing the size of the wire required and making the installation simpler and faster.

Features:

SPECIFICATIONS:

MPPT OPERATION DESCRIPTION:

Above and below schematics show how an MPPT functions during the course of a day.

In the morning, as soon as the MPPT detects that the Panel Voltage is at a usable level (MPPT charge entry voltage): it starts to charge the batteries at maximum efficiency in a BOOST mode which has a nominal voltage of 14.5V per 12V battery bank. If however the batteries are detected to not be uniformly discharged, the MPPT will go into EQUALISE mode to restore the battery bank balance before switching to BOOST mode as its primary charge mode..

The MPPT maintains this mode until the batteries reach the boost voltage and the charge current decreases to a level below a nominal changeable level of 6 Amps. The MPPT then steps down the charge voltage to a nominal voltage of 13.8V per 12V battery bank in FLOAT mode. The MPPT will attempt to maintain FLOAT mode for as long as the panel voltage is present. If no panel voltage s present, the MPPT goes into a sleep state until it detects a rise in panel voltage indicating a new day for charging.