100m Roll - CAT7 SSTP Pure Copper Ethernet Cable (All pairs individually shielded, solid core with b

CAT7 SSTP (SS / double shielded with Braiding / Ripcord for grounding cable + all pairs individually shielded) are used for high bandwidth networks >= 10Gbit/s (are backwards compatible to slower networks) and for use with any of our HDMI Extender over CAT5e / CAT6 / CAT7 products which uses up to 10.8Gbit/s bandwidth. Besides the foil shield, the twisting of the pairs and number of turns per inch causes RF shielding and protects from crosstalk. Cat7 cable standard has been created to allow 10 Gigabit Ethernet over 100m of copper cabling . Cat 7 cable is rated for transmission frequencies of up to 600 MHz. See guide below on frequency testing.

For HDMI Extenders to use a higher color depth, higher bandwidth cables are required such as this cable to ensure best video/audio transmission, minimal signal attenuation and longer distances possible. This cable is full copper / solid-core cabling inside to ensure best possible signal transfer and no other mixed materials are used on the wiring to ensure best signal transfer / quality and stability.

Specifications :

Conductor : 22AWG Copper 0. 643±0. 01mm, 600Mhz Frequency
Insulation : HDPE 1. 42±0. 06mm
Cores/Pairs : 8/4
Drain Wire : Full Copper
Shield : Polyester Tape/Al Foil
Sheath : 7.4±0.1mm PVC/LSOH/PE
Elongation : Min. 150%
Temperature Range : -20 up to +75?
Tensile strength : Min. 0. 51Kg/mm2
Conductor Resistance : Max. 9. 38Ω/100m
Resistance Unbalance : Max. 2%
Insulation Resistance : Max. 150Ω/Km
Mutual Capacitance : Max. 5600pF/100m
Capacitance Unbalance : Max. 330pF/100m
Impedance : 100±15
Spark Test : 2000v
Delay Skew : Max. 20ns/100m
Velocity Of Propagation : 67%