10A Solar Charge controller/ Regulator 12V/24V
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product details
Solar Charge Controller 10A (12v=120w / 24v=240w)
Solar Charge Controller Regulator 10A 12V 120W or 24V 240W auto Switch
For 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
Package including:
1. 1PCS 10A Solar Contorller
2. 1PCS User Manual
Can be used for all panels
Over /discharging protection
Short and Open Circuit protection
Advanced design with simple plug and play technology. No need for complicated adjustments
Indicator LED
1.The Battery is being charged strongly when the Charge LED is lighting;Filckering means the battery is in floating charge Mode,if it`s off means charging stopped.
2.When the LOAD LED is lighting,it means there is output and load can work;if it`s off,there isn`t output and the load can`t work.
Introduction:
A solar charge controller is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries from being over-charge and over-discharge, so the life span of it can be extended.
Features:
Function:According to the voltage of battery, Solar charge controller will adjust the charging current and decide if to supply power to the loads.
1. Generally keep the battery on full voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from supplying power to solar panels during nights.
Output voltage:12V 24V auto switch
Max load current: =12A
Full charge cut:13.7V
Low voltage cut:10.5V
Temp ompensation:-3mv/?/cell
Zero Load Loses:=20mA
Voltage Drop:<160mv
This Solar Charge Controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Some additional protection features, make the whole system efficient and safe operation
Features:
—Overload, Short Circuit Protection
—Reverse discharging protection
—Reverse-polarity protection
—Under-voltage protection
—Over-charging protection
—Suitable for all 12/24V DC lamps
Specification:
Rated Load Current
10A
Rated Charging Current
10A
Rated Voltage
12V/24V
Voltage of stop power supply
10.8V/21.6V
Voltage of resume power supply
12.6V/25.2V
Voltage of stop charging
14.0V/28.0V
Working temperature
-20°C ~60°C
Size
104 x 96 x 37mm
Weight
130g