Introduction
This HDMI KVM Over IP Extender is based on TCP/IP standard. It transmits max 120 meters from your HDMI or DVI-D source to HD display by single CAT5e/6 cable. At the same time, it¿s also transmits you HDMI source by point-to-point mode, one point-to-many mode and cascade connection mode.
Features:
- Support HDMI 1.3/HDCP1.1&1.2
- Support point-to-point mode, one point-to-many mode and cascade connection mode.
- 802.3 Ethernet standard.
- Support IR control, you can control STB or Blue-Ray DVD at receiving side with the remote control.
- The design of pure hardware, plug and play, no need for additional software.
- Support IR remote control 38KHz,NEC.
- Support long distance controll with a keyboard and mouse
Specifications:
| HDTV Resolutions | 480p, 720p,1080p |
| Audio | Sample rate:32kHz,44.1kHz,48kHz |
| IR remote control | 38 KHz;NEC |
| HDMI | HDMI 1.3 |
| HDCP | HDCP 1.2 |
| Power adapter | DC:5V/2A |
| Power consumption | HDMI Sender:3W HDMI receiver:3W |
| Size(L-W-H) | 165*80*21mm |
| Weight | 450g x 2 |
| Operating Temperature/Humidity | 0?-70?/10%-80%RH(no condensation) |
| Storage Temperature/Humidity | -10?-80?/5%-90%RH(no condensation) |
Physical interface diagram
Transmitter
1 DC/5V Power input
2 UTP Output port
3 HDMI Input port
4 IR TX
5 USB port
6 Power indicator
7 Signal indicator
Receiver
1 DC/5V Power input
2 UTP Input port
3 HDMI output port
4 IR RX
5-6 USB port for KVM ( keyboard and mouse)
7 Power indicator
8 Signal indicator
Connection and operation:
1) Connect the HDMI source (such as DVD, PS3, STB ) to the ¿HDMI IN¿ of transmitter with your HDMI cable.
2) Connect the ¿HDMI out¿ of Receiver to HDTV display with your HDMI cable.
3) Connect the transmitter and the receiver by Cat 5E/6 cable, distance can be up to 120m.
4) Connect the two 5V power supply to the transmitter and receiver, power supply for the equipment and the LED indicator light on. When status lamp on and flicker, equipment starts normal.
5) Connect the ¿IR receiver ¿into ¿IR-TX¿ port on transmitter, and ¿IR transmitter ¿ into the ¿IR-RX¿ on receiver, and make sure the IR transmitter aim at IR Receiver of the controlled device if you need the IR control function.
Package contents:
1x Transmitter
1x Receiver
2x 5V/2A Power Supply.
1x IR transmitter
1x IR receiver
1x User¿s Manual
Application diagrams:
One to one application:
One to many application
