12V 120AH Gel Solar Deep Cycle Battery - OMEGA

12V 120AH Gel Solar Deep Cycle Battery -  OMEGA

This Deep cycle battery can be used with the following:
- Inverters (please check if inverter can charge gel batteries)
- UPS systems
- Electrical Tools
- Boats or Caravans
- Electrical Vehicle
- Medical Equipment

Warning:
- Avoid short circuit
- Keep away from flammables
- Do not charge in a sealed container
- Recharge immediately after discharge.

Specifications:
- 12V 120Ah
- Charging voltage for standby use; 13.50-13.68V
- Charging voltage for cycle use; 14.40-14.80V
- Max. charging current [A]; 0.1C-0.25C
- C means; the valve of the battery's rated capacity
- Package weight; 30.6 kg
- Package dimensions; L=41cm x H=18cm x W=25cm

What's in the box
1 x 12V 120AH OMEGA Deep Cycle Battery

Best Practices to Prolong Battery Life:
- Never discharge your battery below the recommded Depth of Discharge (DOD). 50% for GEL and 80% for Lithium Ion.
- Ensure your battery and the terminals to the Inverter are clean and tightly fafstened.
- Consistently drawing current from a battery without letting it fully charge degrades the battery quicker.
- Use batteries at an ambient temperature of 25 degress Celcius.
- Ensure good ventilation.

GEL batteries are not recommended for use in stage 3-6 load shedding for a prolonged period because the batteries would not get enough time to recharge full. Each loadshedding session is conted as a cycle as the battery is drained when the power is off and starts charging again when the power comes back on.

Please make sure that your inverter/charger works well with GEL batteries before buying. Warranty falls off if wrong or incompatible inverter/charger is used.

Warranty: 30 Days Replacement

Warranty Condition:

A certified electrical wireman or master electrician with a current Department of Labor registration is required to install all inverters and batteries. Once installed, a current electrical certificate of compliance (COC) for the installation of the solar or backup system is required. The installation needs to adhere to SANS 10142 in its entirety. If a warranty claim is filed without installation images, a current COC, and documentation that the item was installed by a licensed wireman or master electrician, it may be denied and become void.