12V/24V 10A/20A/30A Dual USB Output Lithium Battery PWM Solar Controller LCD displ... (CURRENT: 10A)
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615116863
SELECTED OPTION:
CURRENT: 10A
1.Build-in industrial micro controller.
2.Big LCD display, all adjustable parameter.
3.Fully 3-stage PWM charge management.
4.Buiid-in short-circuit protection, open-circult protection, reverse protection, over-load protection.
5.Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging.
6.Dual Mos Prevent Reverse current protection, low heat production.
Specification:
| Batt Voltage | 12V-24V |
| Charge current | 10A/20A/30A |
| Discharge current | 10A |
| Max solar input | 12V battery, the highest23V;24V battery when the highest 46V |
| Battery type | B1=Lead acid battery 12V /24Vauto B2=Lithium-ion battery (lithium battery) 3 strings 3.7V=11.1V B3=Lithium iron phosphate battery 4 strings 3.2V=12.8V |
| Equalization | 14.4V(B1)?? 12.6V(B2)???? 14.6V(B3) |
| Discharge stop | 10.7V(B01) ?? 9V(B2)?? 10V(B3) |
| Discharge reconnect | 12.6V(B1) ? ? 10.5(B2)?? 12V(B3) |
| Voltage of openlight | Solar panel 8V(Light lights delay) |
| Voltage of closelight | Solar panel 8V(Light off delay) |
| USB output | 2 way USB output, 5V/2.5A(MAX) |
| Self-consume | <10 mA |
| Operating temperature | -35~+60?ﾣC |
| Size | 133.5*70*35mm |
| Weight | 165g |
Package Included:
1x Solar Street Lamp Controller
Tips:
1. This controller is suitable for 3 types of batteries, lead-acidbatteries(12V/24V auto), lithium-ion batteries(3 strings of 111V lithiumbatteries); lithium iron phosphate batteries(4 strings of 128V) Dontused in Other battery.Battery type descriptionB1 is a lead-acid battery(12V/24V auto)B2 is a lithium ion battery (3 strings of 111V lithium batteries);B3 is lithium iron phosphate battery(4 strings 128V) 2.The battery cable should be as short as possible to minimize loss.
3. When installation for the first time, set the battery type according tothe type of battery and make sure that the battery has enough voltageso that the controller can recognize the correct battery type.
4. The charge regulator is only suitable for regulating solar modules.Never connect another charging source to the charge regulator. ?
?