R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable. Check my rate
The seller has indicated that they will usually have this item
ready to ship within 2 business days.
Shipping time depends on your delivery address.
The most accurate delivery time will be calculated at checkout,
but in general, the following shipping times apply:
Introducing the 12V 300AH Deep Cycle Gel Battery. This Deep Cycle Gel battery is a superior DC Gel Design with thick plates, high-density active materials and stronger electrolytes, which can withstand repeated deep cycle applications. The Deep Cycle Gel batteries have a special design that gives them a 10-year floating lifespan at 25°C
Specifications 12V 300AH Deep Cycle Gel Battery: Name : 12V 300AH 3.6Kwh Model : BF-GBN300 Nominal Current: 300Ah Nominal Voltage: 12 Volts Type : GEL Unit
Dimension : 52.5 x 27.5 x 27.8 CM Weight: 60kg
Best Practices to Prolong Battery Life: - Never discharge your battery below the recommded Depth of Discharge (DOD). 50% for GEL and 80% for Lithium Ion. - Ensure your battery and the terminals to the Inverter are clean and tightly fafstened. - Consistently drawing current from a battery without letting it fully charge degrades the battery quicker. - Use batteries at an ambient temperature of 25 degress Celcius. - Ensure good ventilation.
GEL batteries are not recommended for use in stage 3-6 load shedding for a prolonged period because the batteries would not get enough time to recharge full. Each loadshedding session is conted as a cycle as the battery is drained when the power is off and starts charging again when the power comes back on.
Please make sure that your inverter/charger works well with GEL batteries before buying. Warranty falls off if wrong or incompatible inverter/charger is used.
Warranty: 30 Days Replacement
Warranty Condition:
A certified electrical wireman or master electrician with a current Department of Labor registration is required to install all inverters and batteries. Once installed, a current electrical certificate of compliance (COC) for the installation of the solar or backup system is required. The installation needs to adhere to SANS 10142 in its entirety. If a warranty claim is filed without installation images, a current COC, and documentation that the item was installed by a licensed wireman or master electrician, it may be denied and become void.