EASY OPERATION
Step 1: check your car's temperature gauge to make sure the engine reaches its operating temperature. Warm oil flows easily, also to ensure the contaminants suspended in the oil rather than settled on the bottom.
Step 2: set up the oil extractor. please check the instructions on the item or on the manual, to figure out the right direction the oil should be flowing.
Step 3: attach the smaller diameter tube to the inlet side, larger diameter tube to the outlet side.
Step 4: stick the inlet tube as far down the dipstick tube as you can, connect the oil extractor to the car's battery, and stick the outlet tube to an oil container.
Step 5: turn on the oil extractor and it will pump the old oil at ease. Now you can clean the oil filter and add fresh oil to the engine.
Specificaiton: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Diesel or heating oil: 1.5 L/min, Motor oil(40-60 ): 0.2 L/min.
Easy Installation: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
Ideal Equipment: Extracting motor oil from your vehicle without mess & specialised tools extract the oil from your car, motorcyle, scooter, quad bike, truck, boat, forklift, generator, tractor, ride on mower etc siphon & transfer diesel To cars, trucks, ships, boats, tractors, farm machinery, plant equipment etc.
Professional Oil Change Pump: The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time.
ATTENTION
Do not pump cold engine oil. Please make sure the oil is warmed up before starting pumping.Cold oil is too thick and it will cause damage to the pump.
It is strictly forbidden to absorb water, gear oil, highly flammable liquids (gasoline, fuel, petrol, etc.)
Before use, check if it matches your power supply, and there's no leak at the motor-tube connection.
Each running time of this oil pump should not exceed 30 minutes.
Pumps that does not work for the first time you use it will be replaced for free.
Package Included:
1 x oil extraction pump
1 x inlet hose (120cm)
1 x outlet hose (150cm)
2 x battery clamps
2 x hose clamps
.jpg)
