12V Pump Diaphragm Self Priming High Pressure 3.5 L/min:
Specifications:
Inlet/Outlet: 10mm Outer Diameter x 6mm Inner Diameter
Voltage: 12V DC
Max Working Current: 2 Amp
Max Flow Rate: 3 - 3.5 Ltr/Min
Max Suction: 1.5m
Max Lift: 4-5M
Max Circulating Water Temperature: 50°C
Max Pressure: 0.48Mpa (70PSI)
Size:
Total Height: 60mm
Total Length: 125mm
Motor Diameter: 48mm
Used in Household appliances, Drinking water equipment, Tea sets, Coffee machine, Coke, Fruit juice machine, Milk machine, Dishwashers, Disinfection machine, Aquarium equipment, Bonsai, Electronic equipment, Medical apparatus and Instruments, Spraying equipment, Spray device, Electric sprayer, Water treatment equipment, Purification equipment, Filter, Cooling equipment, Cleaning equipment, Ships, Yachts, Water desalination, Vehicles, Bath, Toilet, health, Environmental protection, etc.
If water is not clean, be sure to buy a filter.
Search: "Pump Filter" in our store
Notice:
1. This model is not allowed for water as hot as 60 CELSIUS DEGREE or above, or sewage water with sand or other impurities. It will cause great damage to the pump.
2. This pump is not submersible. Do not immerse it into water or spray water onto it. And, dry it up after usage if accidentally a few drop of water is splashed onto it.
3. Please do not put it in a moist environment.
4. It has to use with filter system, such as filter net. And for filter net, it requires specification above 80-mesh. Too much particles will be harmful to the pump.
5. Only for household usage, not for commercial purposes. And, avoid long period non-stop working, over-heat will do harm to motor.
6. The diameter of the blowhole has to be in accordance with rated valve.
7. The power source has to be in accordance with input parameter of the pump.
8. Recommended specification of the power line is copper wire, no slimmer than 0.75mm ⊃2; and 2.5m long. If you want to lengthen the power line, you will have to use larger diameter wire. Otherwise, it will overload the power line.
9. Suggested internal diameter of water outlet pipe is no less than 5.5mm and within 10m long. It can’t be too long or to slim or it will affect pressure flow.
10. Suggested internal diameter of water inlet pipe is no less than 6mm, and the length of inlet pipe while self-sucking is no longer than 1.5m.
11. Inlet water pressure no higher than 0.1mpa/1kg while working with system like running water with pressure source, the length of pipe is allow to be longer.
12. After using in winter days, please drain out water inside the pump and pipe, or the pump will burst in cold weather. On normal days, if you don’t use the pump, please also drain out the pump and put cover upon water inlet and outlet.
13. Leakage protective device is required in the Electric circuit where power adaptor connects to commercial power when it uses AC 220v 50hz commercial power.
Please see all our listings here:
www.bidorbuy.co.za/seller/434337/Led_Select
