1K Easy Filler 400ml

1K Easy filler is a spray on high build filler primer. (400ml can)

It is a modern 1K acrylic filler with high filling properties and coverage.

It is used to fill up build lines on 3D prints and models.

light sanding between layers will give a smooth exceptional finish.

It has a very high fill and covering capacity

- A simple, fast and time-saving process

- Fast drying

- Suitable for wet and dry sanding

- Over-paintable with water-based and solvent-based paints

- Resistant to silicone remover

- Perfect adhesion on steel, aluminum, polyester putty, old paintwork

- Suitable on the following plastics: - PLA, PC, PVC, ABS, PA, SAN, PU, UP, EP, PETG, NYLON

- Chromate free

Drying:
Air: 60 minutes at 20
Infrared:15-20 minutes
The drying time depends on the environmental temperature, layer thickness and humidity

Directions:
It is essential to wear a respirator mask!
Before use, shake well for at least 2 minutes. The surface must be thoroughly cleaned and slightly sanded. The surface must be free from grease, dust-free and dry. Clean with silicone remover. Carry out a spray test. Apply 2-3 layers with a layer thickness of 70-80. Flash off between layers 2-3 minutes