descriptionmaterial: metalColour: BlackSupport Interface: USB3.0 TO SATA 22PINSupport System: WinXP/Vista/Win7/Win8 32-bit/64-bit LINUXMeets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 GbpsSupport Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.Supports two SATASupport AHCI1.0 mode and IDE modeSupport native command queue (NCQ)Supports FIS based on port multiplier switches or command switches.Hot-swappable and hot-swappable.Compatible with SATA6G, 3G and 1.5G Hard DrivesBus interfacePCI-Express x1 slotExtension ports2 SATA3.0 interfacesSystem RequirementsOne available PCI Express X1 slot, supporting PCI-E X2 X4 X8 X16Operating System: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linuxSystem disk and PCIE to SATA3.0 adapter card connection conditions and solutions:1, PCIE to SATA3.0 SATA interface mode is AHCI mode, if you want to insert the system disk in our card, the premise is that your system disk installed on the motherboard must be AHCI mode installation, otherwise it can not pass Our card adapter card boot system.2. If it is determined that the system disk is inserted in the AHCI mode of the SATA interface mounting system on the mainboard, then the hard disk can be directly inserted into our card, and then the mainboard BIOS is set to start the system disk as the first boot.3, the above two conditions are available, if you still can not start, or repeatedly restart, then the motherboard hard drive interface and our adapter card conflict, the solution is to enter the motherboard BIOS, the motherboard's hard disk interface options set to Disabled, save and restart to boot the systemAttention: Don't Support as System Disk Boot, only used as extension.Package Contents:1 x expansion card1. with the popularity of USB3.0, USB3.0 TO SATA3.0 extension cable uses USB3.0 high-speed transmission, compatible with 2.0 interface, you can directly access the SATA interface 2.5-inch notebook hard drive, so that your laptop hard drive will immediately become High-speed USB3.0 mobile hard disk2. Built in 2 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps