Name: 2-Trumpet Train Air Horn 12V Compressor Tubing 150 dB 170 PSI Kit 3L for Car Truck Campers
SKU: 1402095[EXP]
Price: 2722.43 ZAR
Availability: SoldOut

2-Trumpet Train Air Horn 12V Compressor Tubing 150 dB 170 PSI Kit 3L for Car Truck Campers

New

15 were available

Indicative market price: R4,367.36

R2,722.43

38% off

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

There are various locker and counter collection points across South Africa.
View locations

The seller has indicated that they will usually have this item ready to ship within 15 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

The World OnLine10225

98.41 % Positive ratings

Buyer protection

How you're covered

Get it now, pay later

Condition

New

Location

International

Product code

1402095[EXP]

Bob Shop ID

411718945

This comes with built-in 0-170 PSI pressure gauge which is designed for any high-pressure air horns that require on-board air system. Equipped with built-in temperature switch with great performance. Will automatically shut off when air compressor goes over 80 °C and restart when it gets back down to 70 °C.

Feature:

Model number: 940532

Product name: 4 Trumpet Air Horn Kit

Compressor:

Overall size: 385mm (L)*137mm (W)*183mm (H)

Max pressure: 170 PSI

Power input: DC 12V

Max voltage: 18 A

Tank capacity: 3 Liters

Duty cycle: 15%

Hose length: 5.08m

Pressure Switch Settings: 100 PSI on, 125 PSI off

4 Trumpet air train horn:

Color: Black

Material: Zinc

Decibel: 150db

Voltage: 12V/24V

Overall size: 345mm* 155mm* 165mm

Trumpet length: 165mm, 225mm, 290mm, 345mm

Trumpet width: 90mm

HOW TO USE:

1. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.

2. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.

Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced.

3. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too.

4. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.

5. Install new receiver drier or accumulator and new orifice tube or expansion valve.

6. Evacuate the A/C system for a minimum of one hour.

7. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.

8. Start engine whit A/C controls on MAX AIR with door and windows open.

9. Add the remaining charge of refrigerant as called for by the manufacture.

Package Included:

1 X 4 Trumpet Air Horn

1 X Air Compressor

1 X Air Tubing