| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
HDMI SWITCH /SPLITTER Combo with 2x HDMI inputs and 8x HDMI outputs. Supports Ultra HD or 4K resolution (3820 x 2160) and 3D, powered 5VDC PSU.
Selects any single one of two HDMI input sources (e.g. decoder primary, media player) to display simultaneously on four separate outputs. All outputs will always display the same image which is sourced from either input 1 or 2.
If you require different input sources to display on different TV's at the same time then you need a HDMI Matrix.
Refer to the additional product image/s for an illustration of a typical wiring diagram.
Note: The recommended maximum length of a HDMI cable is 15m. For HDMI Outputs of greater distances a HDMI Extender over CAT Cable will be required. If your existing HDMI signal is 'weak and intermittent' you may consider a HDMI Signal Booster to achieve a max. cable length of 30m.
Extenders are paired devices consisting of a SENDER TX unit (located at your HDMI source) and a RECEIVER RX unit (located at the extended bedroom TV). Extenders are connected to each other via CAT6 cable and can extend the HDMI signal up to 120m. The extenders also have 'IR Source Support' e.g. your DSTV remote will function as per normal, from any of the extended locations. It is possible to have a combination of both 60m and 120m HDMI Extenders connected to any outputs.
