3307454s Fuel Tank Filter Fuel Water Separator Assembly with Pf10 Filter Elements B10-al for Crude

1. Keeping A Clean 496-5 Filter In Your Vehicle Can Reduce Damage Done to Your Engine and Other Fuel Delivery Components.2. 30 Micrometres, Provide High Flow Rates and Superior Filtration Efficiency, Protect Fuels From Particles Such As Rust, Sand, Dirt and Water.3. with Protective Sheet to Prevent The Filter Elements From Being Destroyed Or Deformed By Pressure.4. with 1inch Npt Pipe Fittings Inlet and Outlet Marked At The Top Of The Cap.5. Use 495-4 Fuel Tank Filter Bowl, Makes It Easy to Visual Monitor The Fuel Flow, The Fuel Flow Will When You Need to Replace TheFits Common Fuels Such As Unleaded Gas, Crude Oil, Fuel Oil, Up to 20% Biodiesel (B20) and Related Additives.Elements. Drain Valve Installed At The Bottom to Drain Water.Installation:1. Attach Filter to Storage Tank Valve On Opening Marked \In\.2. Attach Hose and Nozzle to Filter Opening Marked \Out\.3. When Installing The Elements and Bowl, Apply A Coating Of Oil to Each Side Of Gasket.4. These Components Should Be Hand Tightened Only. Over Tightening Of The Filter Bowl Will Result In Difficulty In Removal At A Later Date.5. When Assembly Is Complete, Check for Leaks.Fuel Filter Elements:30 Micrometres with Protective SheetInlet\/Outlet Size:1inch NptHyaline Bowl with Drain ValveFlow Rate:Max 25 GpmWorking Pressure:Up to 150 PsiGravity Flow Rate:Approximately 5 GpmColour:As ShownMaterial:Nylon + aluminumSize:Height:9.5inchPackage Contents:1 * B10-AL Oil Storage Tank Assembly1 * Wrench1 * Raw Material BeltOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.