.size_table_start table,.size_table_start table tr td { border:2px solid #ddd;}.size_table_start table { width: 100%; min-height: 25px; line-height: 25px; text-align: center; border-collapse: collapse;}.size_table_start,.size_table_end {clear:both;}
Note:
Thiscontrolleristhereplacementpartsfor ,ifyoudon`thaveID:1647907 ,youshouldnotbuyit
Specification:
Voltage
| DC 36V
|
Rated Power
| 350W
|
Undervoltage
| 30V
|
Current-Limiting
| 8.8A
|
Instruction:
1. Boot: Long press the boot (about 1s). At the same time, the buzzer sounds twice.
2. Shutdown: Press and hold 3s to shut down. At the same time, the buzzer sounds twice.
3. Light: In the power-on state, short press (within 1 second) once, turn on the front and rear lights,
the headlights are always on, and the taillights are flashing.
4. Brake: Electronic brake + disc brakes. The tail light is long on the brakes.
5. Gear shift: The power-on state, the default is the low-speed file;
press the button twice (press twice in one second) to switch the gear position; Green is low gear; red is high gear
6. Battery display: 33v-36v The first light is long
36v-37v one or two lights long bright
37v-38.5v one or two lights long bright
38.5v or more, one, two, three, four lights
Low voltage alarm: The first light flashes when the battery is below 33V, and the buzzer sounds 6 times.
7. Low voltage alarm speed mode: The speed limit is about 15Km/h. When the power returns to 37V,
the throttle must return to the initial position to release the low voltage and return to normal operation.
8. Constant speed cruise: The speed is stable for about 6 seconds to automatically start the cruise control;
after the cruise is fixed, the throttle can be released; press the brake
or push the throttle again to release the cruise control and enter the manual mode.
9. Speed: The low speed gear is 15±2km/h; the high speed gear is 25±2km/h.
10.Automatic shutdown: Automatically shut down 10 minutes after no operation.
Error Code:
1) E1 Motor Hall failure
2) E2 MOS
MOS fault or motor phase line short circuit fault
3) E3 Brake failure
4) E4 Handlebar failure
5) E5 Undervoltage protection
6) E6 Instrument/control communication failure
7) E7 Overvoltage protection
8) E8 Controller op amp failure
9) E9 Stall protection
Package Included:
1 X
| Controller
|
1 X
| Dashboard
|
