3D Photoelectric CNC Edge Finder With Probe For Precise Rod Measurement Tasks

3D Photoelectric CNC Edge Finder With Probe For Precise Rod Measurement Tasks DESCRIPTION Features: * 3D photoelectric edge finder is a high-precision edge measurement product. * Higher alignment accuracy, repeatability up to 0.001 mm. * More comprehensive Z-axis measurement. * Probe is used for better accuracy retention. * Larger probe oscillation to prevent probe damage caused by errors. * No need to use the conductive principle, and measurement will not be impossible due to non-conductive materials or machine tool spindles. Specifications: Part name: 3D edge finder with probe Product model: MMP25 Repeatability: 0.001 Size: Standard Color: As shown in the figure Detection direction: ±X ±Y +Z Probe safety travel: ±15° in X and Y planes, +5mm in Z direction Trigger life: 5 million times Power supply: 14250 lithium battery 3.6V Insulating materials that can be measured: metal, bakelite, wood, plastic, etc. How to use the 3D photoelectric edge detector; According to the position of the workpiece to be measured, move the edge detector to the workpiece position and approach the workpiece in a stepping manner. 3D photoelectric edge detector adjustment After installing the 3D photoelectric edge detector on the machine tool, rotate the spindle to check the runout of the edge detector's edge ball. Check the runout of the edge detector's edge ball and adjust it with four for M3 set screws until the runout reaches 0.01 mm. Adjust the edge detector's edge ball with four for M3 set screws until the runout reaches 0.01 mm, and then tighten the screws. After tightening the screws, the edge detector is ready for use. Package Contents: 1 x MMP25 3D Photoelectric Edge Finder with Probe Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.