This item has closed with no items sold
View the relisted Item
View the relisted Item
View other items offered by szulou1670
Similar products
3pcs 37V 42V 10S 45A Li-ion Battery Protection Board BMS PCB System
New
R1,020.00
Closed
11 May 24 00:05
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
612374316
Specifications:
Continuous discharging current: 45A
Instantaneous diacharge current: 100A
Charging voltage: 42V
Charging current: 45A
Over-charge detect: 4.28±0.05V
Protect delay: 100ms
Over-charge release: 4.08±0.05V
Balance:
Detect voltage: 4.2±0.025V
Release voltage: 4.2±0.05V
Balance current: 60±5mA
Over-discharge: 2.55±0.08V
Over-discharge detect delay: 50mS
Release voltage: 2.9±0.1V
Detect voltage: 150mV
Detect delay: 15mS
Current detect: 130±10A
Resistance: a???15m??
Working current:a??? 50uA
Sleep current(when over-discharge): a???10uA
Working temperature: -30 to 80a??
Size: 120 x 60 x 9mm
Main function:
Over charge protection, over discharge protection function, short circuit protection
function, over current protection function,with band balance.
Connections:
Step1: Connect charging /discharging wire , battery pack negative wire
Step2: After confirm the wires are connected OK, plug the connector cable in the BMS
DO NOT plug CONNECTOR CABLE in the BMS before connect wire!!
Attention, ESD protection during work
Package included:
3 x 10S 45A Protection board
3 x Cabel
Continuous discharging current: 45A
Instantaneous diacharge current: 100A
Charging voltage: 42V
Charging current: 45A
Over-charge detect: 4.28±0.05V
Protect delay: 100ms
Over-charge release: 4.08±0.05V
Balance:
Detect voltage: 4.2±0.025V
Release voltage: 4.2±0.05V
Balance current: 60±5mA
Over-discharge: 2.55±0.08V
Over-discharge detect delay: 50mS
Release voltage: 2.9±0.1V
Detect voltage: 150mV
Detect delay: 15mS
Current detect: 130±10A
Resistance: a???15m??
Working current:a??? 50uA
Sleep current(when over-discharge): a???10uA
Working temperature: -30 to 80a??
Size: 120 x 60 x 9mm
Main function:
Over charge protection, over discharge protection function, short circuit protection
function, over current protection function,with band balance.
Connections:
Step1: Connect charging /discharging wire , battery pack negative wire
Step2: After confirm the wires are connected OK, plug the connector cable in the BMS
DO NOT plug CONNECTOR CABLE in the BMS before connect wire!!
Attention, ESD protection during work
Package included:
3 x 10S 45A Protection board
3 x Cabel